PACKAGE NAME:  XML-Parser-2.34-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  105 K
PACKAGE SIZE (uncompressed):  510 K
PACKAGE REQUIRED:  perl >= 5.8.5-i486-2,expat >= 1.95.7-i486-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
XML-Parser: XML::Parser (Perl extension)
XML-Parser: 
XML-Parser: Perl interface to James Clark's XML parser, expat. It requires
XML-Parser: at least version 5.004 of perl and it requires that you have
XML-Parser: release 1.95.0 or greater of expat installed.
XML-Parser: 
XML-Parser: Authors: Larry Wall and Clark Cooper

PACKAGE NAME:  a2ps-4.13b-i386-2.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  615 K
PACKAGE SIZE (uncompressed):  3140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
a2ps: a2ps (any to PostScript filter)
a2ps:
a2ps: GNU a2ps is an Any to PostScript filter.  Of course it processes
a2ps: plain text files, but also pretty prints quite a few popular
a2ps: programming languages.  Also contained in this package is psutils, a
a2ps: collection of programs for manipulating PostScript files.
a2ps:
a2ps: a2ps is used by Apsfilter, so be sure to install this package if you
a2ps: plan to do any printing.
a2ps:
a2ps:

PACKAGE NAME:  acct-6.3.2-i386-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  43 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
acct: acct (process accounting utilities)
acct:
acct: This is a set of utilities which reports and summarizes data about
acct: user connect times and process execution statistics.  To activate
acct: process accounting, create the log file (touch /var/log/pacct), and
acct: then use the accton command to start it (accton /var/log/pacct).
acct: Be aware that the log file can grow to be quite large.
acct:
acct: The GNU process accounting utilities were written by Noel Cragg.
acct:
acct:

PACKAGE NAME:  ash-0.4.0-i386-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  63 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ash: ash (Kenneth Almquist's ash shell)
ash:
ash: A lightweight (92K) Bourne compatible shell.  Great for machines with
ash: low memory, but does not provide all the extras of shells like bash,
ash: tcsh, and zsh.  Runs most shell scripts compatible with the Bourne
ash: shell.  Note that under Linux, most scripts seem to use at least some
ash: bash-specific syntax.  The Slackware setup scripts are a notable
ash: exception, since ash is the shell used on the install disks.  NetBSD
ash: uses ash as its /bin/sh.
ash:
ash:

PACKAGE NAME:  at-3.1.10-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  33 K
PACKAGE SIZE (uncompressed):  110 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
at: at (delayed command execution)
at:
at: at and batch read shell commands from standard input (or a specified
at: file) storing them as a job to be scheduled for execution at a later
at: time.
at:
at: The 'at' command was written by David Parsons and Thomas Koenig.
at:
at:
at:
at:

PACKAGE NAME:  bc-1.06-i486-3.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  69 K
PACKAGE SIZE (uncompressed):  190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bc: bc (An arbitrary precision calculator language)
bc:
bc: bc is an arbitrary precision numeric processing language.  Syntax is
bc: similar to C, but differs in many substantial areas.  It supports
bc: interactive execution of statements.  bc is a utility included in the
bc: POSIX P1003.2/D11 draft standard.
bc:
bc: The GNU version of bc was written by Philip A. Nelson.
bc:
bc:
bc:

PACKAGE NAME:  cdparanoia-IIIalpha9.8-i486-2.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  95 K
PACKAGE SIZE (uncompressed):  290 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cdparanoia: cdparanoia (digital audio extraction tool)
cdparanoia:
cdparanoia: Cdparanoia is a Compact Disc Digital Audio (CDDA) extraction tool,
cdparanoia: commonly known on the net as a 'ripper'.  It reads digital audio data
cdparanoia: from a Compact Disc and saves it to sound files.  Cdparanoia has been
cdparanoia: designed to read correct audio data even using cheap CDROM drives
cdparanoia: prone to misalignment, frame jitter and loss of streaming.
cdparanoia: Cdparanoia will also read and repair data from CDs that have been
cdparanoia: damaged in some way.
cdparanoia:
cdparanoia:

PACKAGE NAME:  cdrdao-1.2.1-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  280 K
PACKAGE SIZE (uncompressed):  1170 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cdrdao: cdrdao (CD burning utility)
cdrdao:
cdrdao: cdrdao burns proper disc-at-once (DAO) audio discs.  In DAO mode the
cdrdao: disc is written in one shot, so you don't have to have irritating 2
cdrdao: second gaps interrupting a live recording.
cdrdao:
cdrdao:
cdrdao:
cdrdao:
cdrdao:
cdrdao:

PACKAGE NAME:  cdrtools-2.01-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  579 K
PACKAGE SIZE (uncompressed):  2840 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cdrtools: cdrtools
cdrtools:
cdrtools: Tools for mastering and writing compact discs.
cdrtools:
cdrtools: cdda2wav -- CD audio sampling utility.
cdrtools: cdrecord -- burn discs in most ATAPI and SCSI CD-R drives.
cdrtools: mkisofs  -- create ISO9660/HFS/Joliet CD-ROM images.
cdrtools: mkzftree -- compress a file tree to make a compressed CD-ROM.
cdrtools:
cdrtools:
cdrtools:

PACKAGE NAME:  darkice-0.16-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  79 K
PACKAGE SIZE (uncompressed):  290 K
PACKAGE REQUIRED:  lame >= 3.96,libogg >= 1.1,libvorbis >= 1.1,faac >= 1.24,alsa-lib >= 1.0,jack >= 0.100,cxxlibs >= 5.0,gcc-g++ >= 3.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
darkice: DarkIce (live audio streamer)
darkice: 
darkice: DarkIce is an IceCast, IceCast2 and ShoutCast live
darkice: audio streamer. It takes audio input from a sound card,
darkice: encodes it into mp3 and/or Ogg Vorbis, and sends the mp3/ogg
darkice: stream to one or more IceCast and/or ShoutCast servers.
darkice: 
darkice: Website: http://darkice.sourceforge.net
darkice: License: GNU GPL
darkice: Author: Tyrell Hungary, http://tyrell.hu

PACKAGE NAME:  desktop-file-utils-0.11-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  35 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
desktop-file-utils: desktop-file-utils contains a couple of command line utilities
desktop-file-utils: for working with desktop entries

PACKAGE NAME:  diffutils-2.8.1-i486-3.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  177 K
PACKAGE SIZE (uncompressed):  620 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
diffutils: diffutils (finds differences between files)
diffutils:
diffutils: The GNU diff utilities finds differences between files.  A major use
diffutils: for this package is to make source code patches.
diffutils:
diffutils:
diffutils:
diffutils:
diffutils:
diffutils:
diffutils:

PACKAGE NAME:  disktype-8-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  25 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
disktype: disktype (disk type detection)
disktype: 
disktype: The purpose of disktype is to detect the content format of a disk or
disktype: disk image. It knows about common file systems, partition tables, and
disktype: boot codes.
disktype: 
disktype: Website: http://disktype.sourceforge.net
disktype: License: Free
disktype: Author: Christoph Pfisterer <chrisp@users.sourceforge.net>

PACKAGE NAME:  dmapi-2.2.5_1-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  28 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dmapi: dmapi (Data Management API library)
dmapi:
dmapi: A library required to use the Data Management API (DMAPI).
dmapi: This interface is defined in the X/Open document 'Systems Management:
dmapi: Data Storage Managment (XDSM) API' dated February 1997.
dmapi:
dmapi: The DMAPI library is used by the xfsdump utility.
dmapi:
dmapi:
dmapi:
dmapi:

PACKAGE NAME:  dvd+rw-tools-6.1-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  81 K
PACKAGE SIZE (uncompressed):  260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dvd+rw-tools: dvd+rw-tools
dvd+rw-tools:
dvd+rw-tools: A collection of tools to master DVD+RW/+R/-R/-RW media.  For further
dvd+rw-tools: information see http://fy.chalmers.se/~appro/linux/DVD+RW/.
dvd+rw-tools:
dvd+rw-tools: The DVD+RW tools were written by Andy Polyakov.
dvd+rw-tools:
dvd+rw-tools:
dvd+rw-tools:
dvd+rw-tools:
dvd+rw-tools:

PACKAGE NAME:  espgs-8.15.3svn185-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  3450 K
PACKAGE SIZE (uncompressed):  21790 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
espgs: espgs (ESP Ghostscript)
espgs:
espgs: ESP Ghostscript is a customized version of GNU Ghostscript, an
espgs: interpreter of Adobe Systems' PostScript(tm) and Portable Document
espgs: Format (PDF) languages.  Ghostscript is an essential part of the
espgs: printing subsystem, taking PostScript output from applications and
espgs: converting it into an appropriate printer or display format.
espgs: Ghostscript supports many printers directly, and more are supported
espgs: through gimp-print and HPIJS, which are add-on packages that work
espgs: with Ghostscript's IJS driver.
espgs:

PACKAGE NAME:  fbshot-0.3-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  7 K
PACKAGE SIZE (uncompressed):  30 K
PACKAGE REQUIRED:  libpng >= 1.2,zlib >= 1.2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fbshot: fbshot (grab framebuffer images)
fbshot: 
fbshot: Grap images of the framebuffer, then saves them to a .png file.
fbshot: 
fbshot: License: GNU GPL
fbshot: Authors: Stephan Beyer <PH-Linex@gmx.net>
fbshot: Paul Mundt <lethal@chaoticdreams.org>
fbshot: Dariusz Swiderski <sfires@sfires.net>
fbshot: 

PACKAGE NAME:  flac-1.1.2-i486-2.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  478 K
PACKAGE SIZE (uncompressed):  2880 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
flac: flac (Free Lossless Audio Codec)
flac:
flac: FLAC stands for Free Lossless Audio Codec. Grossly oversimplified,
flac: FLAC is similar to MP3, but lossless.  "Free" means that the
flac: specification of the stream format is in the public domain, and that
flac: neither the FLAC format nor any of the implemented encoding/decoding
flac: methods are covered by any patent. It also means that the sources for
flac: libFLAC and libFLAC++ are available under the LGPL and the sources for
flac: flac, metaflac, and the plugins are available under the GPL.
flac:
flac: FLAC was developed by Josh Coalson.

PACKAGE NAME:  gamin-0.1.7-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  156 K
PACKAGE SIZE (uncompressed):  940 K
PACKAGE REQUIRED:  python >= 2.4.1,glib2 >= 2.8.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gamin: file monitoring software similar to fam but easier on resources

PACKAGE NAME:  gd-2.0.33-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  111 K
PACKAGE SIZE (uncompressed):  630 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gd: GD (Graphic Utility)
gd: 
gd: This package contains C software to implement JPEG image compression and
gd: decompression.
gd: 
gd: Website: ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics
gd: License: Free distributable
gd: Author: Tom Lane
gd: Author: Philip Gladstone
gd: Author: et.all

PACKAGE NAME:  gimp-print-4.2.7-i486-2.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  1705 K
PACKAGE SIZE (uncompressed):  3420 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gimp-print: gimp-print (IJS printer driver for Ghostscript and CUPS)
gimp-print:
gimp-print: Gimp-Print is the print facility for the Gimp, and in addition a suite
gimp-print: of drivers that may be used with common UNIX spooling systems using
gimp-print: Ghostscript or CUPS.  These drivers provide printing quality for Linux
gimp-print: in many cases equal to or better than proprietary vendor-supplied
gimp-print: drivers, and can be used for many of the most demanding printing
gimp-print: tasks.
gimp-print:
gimp-print:
gimp-print:

PACKAGE NAME:  gnu-gs-fonts-6.0-noarch-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  2264 K
PACKAGE SIZE (uncompressed):  4290 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gnu-gs-fonts: gnu-gs-fonts (fonts for the Ghostscript interpreter)
gnu-gs-fonts:
gnu-gs-fonts: These fonts are used by the GhostScript interpreter.  They come from
gnu-gs-fonts: the gnu-gs-fonts-std and gnu-gs-fonts-other font archives.
gnu-gs-fonts:
gnu-gs-fonts:
gnu-gs-fonts:
gnu-gs-fonts:
gnu-gs-fonts:
gnu-gs-fonts:
gnu-gs-fonts:

PACKAGE NAME:  gphoto2-2.2.0-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  132 K
PACKAGE SIZE (uncompressed):  750 K
PACKAGE REQUIRED:  aalib >= 1.4rc5-i386-1,glibc-solibs >= 2.3.6-i486-5,gpm >= 1.20.1-i486-2,libexif >= 0.6.13-i486-1,libgphoto2 >= 2.2.1-i586-4vl6,libjpeg >= 6b-i386-4,libtool >= 1.5.22-i486-1,popt >= 1.7-i386-1,readline >= 5.1-i486-1,slang >= 2.0.6-i486-2,x11 >= 6.9.0-i486-8
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gphoto2: gphoto2 (command-line frontend to libgphoto2)
gphoto2: 
gphoto2: gphoto2 is a command-line frontend to libgphoto2.
gphoto2: 
gphoto2: Where can I find more information?
gphoto2:  
gphoto2: Visit the gphoto project web site. It should always be found at least
gphoto2: at one of the following URLs:
gphoto2:      http://www.gphoto.org/
gphoto2:      http://gphoto.sourceforge.net/
gphoto2: 

PACKAGE NAME:  gphotofs-0.3-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  16 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  fuse >= 2.5.3-i586-4vl58,glib2 >= 2.10.3-i486-1,glibc-solibs >= 2.3.6-i486-5,libexif >= 0.6.13-i486-1,libgphoto2 >= 2.2.1-i586-4vl6,libtool >= 1.5.22-i486-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gphotofs: GPhotoFS (userspace filesystem for libgphoto2)
gphotofs: 
gphotofs: GPhotoFS is a filesystem client based on libgphoto2 that exposes 
gphotofs: supported cameras as filesystems; while some cameras implement the
gphotofs: USB Mass Storage class and already appear as filesystems (making
gphotofs: this program redundant), many use the Picture Transfer Protocol (PTP)
gphotofs: or some other custom protocol. But as long as the camera is supported
gphotofs: by libgphoto2, it can be mounted as a filesystem using this program.
gphotofs: 
gphotofs: HOME PAGE: http://intr.overt.org/gphotofs
gphotofs: 

PACKAGE NAME:  groff-1.19.2-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  1551 K
PACKAGE SIZE (uncompressed):  6940 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
groff: groff (document formatting system)
groff:
groff: The GNU groff package provides versions of troff, nroff, eqn, tbl, and 
groff: other Unix text-formatting utilities.  Groff is used to 'compile' man
groff: pages stored in groff/nroff format into a form which can be printed or
groff: displayed on the screen.  These man pages are stored in compressed
groff: form in the /usr/man/man? directories.
groff:
groff:
groff:
groff:

PACKAGE NAME:  gutenprint-5.0.0-i586-2vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  5939 K
PACKAGE SIZE (uncompressed):  18630 K
PACKAGE REQUIRED:  readline >= 5.1,ncurses >= 5.5,cups >= 1.2.0,libtiff >= 3.8.2,libjpeg >= 6b,libpng >= 1.2.12,openssl >= 0.9.8b,zlib >= 1.2.3,gimp >= 2.2.13,gtk+2 >= 2.8.20,atk >= 1.10.3,pango >= 1.12.3,cairo >= 1.0.4,x11 >= 6.9.0,fontconfig >= 2.2.3,expat >= 1.95.8,freetype >= 2.1.9,glib2 >= 2.10.3,gtk+ >= 1.2.10,glib >= 1.2.10,perl >= 5.8.8
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gutenprint: gutenprint
gutenprint: 
gutenprint: Gutenprint, formerly named
gutenprint: Gimp-Print, is a suite of printer drivers that may be used with
gutenprint: most common UNIX print spooling systems, including CUPS, lpr,
gutenprint:  LPRng, or others.
gutenprint: 
gutenprint: 
gutenprint: 
gutenprint: 
gutenprint: 

PACKAGE NAME:  hpijs-2.1.4-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  1616 K
PACKAGE SIZE (uncompressed):  3370 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hpijs: hpijs (Hewlett-Packard inkjet drivers for Ghostscript)
hpijs:
hpijs: The Hewlett-Packard Inkjet Driver Project (HPIJS) is an add-on printer
hpijs: driver for GNU Ghostscript.  There are two parts to the IJS interface:
hpijs: the IJS client that resides in GNU Ghostscript, and the IJS server
hpijs: (in this package).  HPIJS runs as a server or co-process to GNU
hpijs: Ghostscript. The server is spawned automatically by GNU Ghostscript.
hpijs:
hpijs: There are currently more than 80 HP inkjet printer models supported
hpijs: with HPIJS.
hpijs:

PACKAGE NAME:  hplip-1.6.7-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  9250 K
PACKAGE SIZE (uncompressed):  14640 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.3-i486-1 | gcc-g++ >= 3.4.6-i486-1,gcc >= 3.4.6-i486-1,glibc-solibs >= 2.3.6-i486-5,libjpeg >= 6b-i386-4,libusb >= 0.1.12-i486-1,openssl >= 0.9.8b-i486-1 | openssl-solibs >= 0.9.8b-i486-1,perl >= 5.8.8-i486-2,python >= 2.4.3-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hplip: hplip (The Hewlett-Packard Linux Imaging and Printing project)
hplip: 
hplip: The Hewlett-Packard Linux Imaging and Printing project (HPLIP)
hplip: provides a unified single and multi-function connectivity
hplip: solution for Linux. The goal of this project is to provide
hplip: "radically simple" printing, faxing, scanning, photo-card
hplip: access, and device management to the consumer and small
hplip: business desktop Linux users. This project is based open source
hplip: software and uses GPL compatible licenses.
hplip: 

PACKAGE NAME:  htop-0.6.5-i586-1vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  42 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  ncurses >= 5.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
htop: htop (interactive process viewer)
htop: 
htop: This is htop, an interactive process viewer. It requires ncurses. It 
htop: is tested with Linux 2.6, but is also reported to work (and was 
htop: originally developed) with the 2.4 series.
htop: 
htop: Hisham H. Muhammad <loderunner@users.sourceforge.net>
htop: GNU GENERAL PUBLIC LICENSE, Version 2, June 1991
htop: 

PACKAGE NAME:  icecast-2.3.1-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  185 K
PACKAGE SIZE (uncompressed):  650 K
PACKAGE REQUIRED:  curl >= 7.12,libidn >= 0.5,openssl >= 0.9,openssl-solibs >= 0.9,libtheora >= 1.0alpha4,libvorbis >= 1.1,libogg >= 1.1,libxslt >= 1.1,libxml2 >= 2.6,zlib >= 1.2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
icecast: icecast (audio streaming media server)
icecast: 
icecast: Icecast is a streaming media server which currently supports
icecast: Ogg Vorbis and MP3 audio streams. It can be used to create an
icecast: Internet radio station or a privately running jukebox and many
icecast: things in between. It is very versatile in that new formats
icecast: can be added relatively easy and supports open standards for
icecast: communication and interaction.
icecast: 
icecast: Website: www.icecast.org
icecast: License: GNU GPL 2
icecast: Author: Jack Moffitt <jack@icecast.org>
icecast: Author: Michael Smith <msmith@icecast.org>

PACKAGE NAME:  ices-2.0.1-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  41 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  alsa-lib >= 1.0,libvorbis >= 1.1,libshout >= 2.1,libtheora >= 1.0alpha4,libogg >= 1.1,libxml2 >= 2.6,zlib >= 1.2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ices: ices (source client for icecast)
ices: 
ices: IceS is the primary source client for icecast 2.x.
ices: It has proven to stable and well featured.
ices: 
ices: Website: www.xiph.org
ices: License: GNU GPL
ices: Author: Michael Smith <<msmith@labyrinth.net.au>
ices: Author: Jack Moffitt <jack@icecast.org>
ices: Author: Karl Heyes <karl@xiph.org>

PACKAGE NAME:  linuxdoc-tools-0.9.21-i486-2.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  3905 K
PACKAGE SIZE (uncompressed):  36080 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
linuxdoc-tools: linuxdoc-tools (utilities for working with DocBook and SGML)
linuxdoc-tools:
linuxdoc-tools: SGML stands for Standard Generalized Markup Language.  This is a
linuxdoc-tools: system which allows you to produce LaTeX, HTML, GNU info, LyX, RTF,
linuxdoc-tools: and plain text (via groff) from a single source file in SGML.  It is
linuxdoc-tools: often used for technical software documentation, such as the Linux
linuxdoc-tools: HOWTO documents.  This package includes everything you need to use
linuxdoc-tools: SGML -- all the standard SGML tools, OpenJade, and tools for working
linuxdoc-tools: with DocBook documents (various DTDs).
linuxdoc-tools:
linuxdoc-tools:

PACKAGE NAME:  lsof-4.76-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  245 K
PACKAGE SIZE (uncompressed):  830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lsof: lsof (list open files)
lsof:
lsof: Lsof is a Unix-specific tool.  Its name stands for "LiSt Open Files",
lsof: and it does just that.  It lists information about files that are open
lsof: by the processes running on the system.
lsof:
lsof: Victor A. Abell of Purdue University is the developer of lsof.
lsof:
lsof:
lsof:
lsof:

PACKAGE NAME:  man-1.6c-i486-2.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  195 K
PACKAGE SIZE (uncompressed):  490 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
man: man (format and display the on-line manual pages)
man:
man: The man package is a collection of tools used for searching and
man: reading the online system documentation.  In fact, on most UNIX-like
man: operating systems it is the primary means of finding out how programs
man: on the system work.  For example, 'man man' will display the
man: documentation for man itself.
man:
man: Man requires the groff text processing package.
man:
man:

PACKAGE NAME:  man-pages-2.39-noarch-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  1749 K
PACKAGE SIZE (uncompressed):  4020 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
man-pages: man-pages (system documentation)
man-pages:
man-pages: Man pages are online documentation for Linux.  This package includes
man-pages: many section 1, 2, 3, 4, 5, 7, and 8 man pages for Linux.
man-pages:
man-pages: The man-pages distribution is maintained by Andries E. Brouwer with
man-pages: the help of more writers, editors, and other contributors than we can
man-pages: name here.
man-pages:
man-pages:
man-pages:

PACKAGE NAME:  mc-4.6.1_p1-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  1003 K
PACKAGE SIZE (uncompressed):  5180 K
PACKAGE REQUIRED:  glib2 >= 2.6,e2fsprogs >= 1.38,gpm >= 1.19,slang >= 1.4,ncurses >= 5.4,bash >= 3.0,perl >= 5.8
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mc: mc (GNU Midnight Commander)
mc: 
mc: MC is a user shell with text-mode full-screen interface.
mc: It can be run on the OS console, in xterm and other
mc: terminal emulators. It allows you to manage files while
mc: making most of you screen and giving you a clear
mc: representation of the filesystem, yet it's simple enough
mc: to be run over a telnet or ssh session.
mc: This release has been patched for lzma support
mc: by Lasse Collin.
mc: 
mc: 
mc: License: GNU General Public License version 2.0
mc: Website: http://www.ibiblio.org/mc/
mc: Author: Andrej Borsenkow <borsenkow.msk@sni.de>
mc: Author: Andrew V. Samoilov <sav@bcs.zp.ua>

PACKAGE NAME:  mpg321-0.2.10-i486-2.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  32 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mpg321: mpg321 (a command-line mp3 player)
mpg321:
mpg321: mpg321 is a free command-line mp3 player, which uses the mad audio
mpg321: decoding library.  mpg321 is written to be a drop-in replacement for
mpg321: the mpg123 player for front-ends such as gqmpeg and programs which use
mpg321: mpg123 to decode mp3 files (like gtoaster, and other CD-recording
mpg321: software).
mpg321:
mpg321: mpg321 requires libao.so from the oggutils package.
mpg321:
mpg321:

PACKAGE NAME:  nano-1.2.5-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  240 K
PACKAGE SIZE (uncompressed):  1090 K
PACKAGE REQUIRED:  ncurses >= 5.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
nano: GNU nano is designed to be a free replacement for the Pico text editor

PACKAGE NAME:  parted-1.6.25.1-i586-4vl5.tgz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  678 K
PACKAGE SIZE (uncompressed):  2040 K
PACKAGE REQUIRED:  e2fsprogs >= 1.35,readline >= 4.3,ncurses >= 5.4,gpm >= 1.19.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
parted: parted (GNU disk partitioning tool)
parted:
parted: GNU Parted is a program for creating, destroying, resizing, checking
parted: and copying partitions, and the filesystems on them.  This is useful
parted: for creating space for new operating systems, reorganizing disk
parted: usage, copying data between hard disks, and disk imaging.
parted:
parted:
parted:
parted:
parted:

PACKAGE NAME:  parted-1.8.0-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  612 K
PACKAGE SIZE (uncompressed):  2860 K
PACKAGE REQUIRED:  bash >= 3.1.017,e2fsprogs >= 1.38,readline >= 5.1,ncurses >= 5.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
parted: Parted (harddisk partition utility)
parted: 
parted: GNU Parted is a program for creating, destroying, resizing,
parted: checking and copying partitions, and the filesystems on them.
parted: This is useful for creating space for new operating systems,
parted: reorganising disk usage, copying data between hard disks,
parted: and disk imaging.
parted: 
parted: Website: http://www.gnu.org
parted: License: GNU GPL
parted: Author: Andrew Clausen <clausen@gnu.org>
parted: Author: Lennert Buytenhek <buytenh@gnu.org>
parted: Author: Matthew Wilson	<msw@redhat.com>

PACKAGE NAME:  progsreiserfs-0.3.0.4-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  169 K
PACKAGE SIZE (uncompressed):  800 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
progsreiserfs: progsreiserfs (reiserfs access library)
progsreiserfs: 
progsreiserfs: This is a library for reiserfs filesystem access and manipulation
progsreiserfs: wich might be linked against any projects that needs reiserfs access.
progsreiserfs: There are GNU Parted, GNU GRUB, Yaboot, Partimage, EVMS, etc.
progsreiserfs: 
progsreiserfs: Website: http://reiserfs.linux.kiev.ua
progsreiserfs: License: GNU GPL
progsreiserfs: Author: Yury Umanets <torque@ukrpost.net>

PACKAGE NAME:  quota-3.13-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  131 K
PACKAGE SIZE (uncompressed):  790 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
quota: quota (Linux disk quota utilities)
quota:
quota: An implementation of the diskquota system for the Linux operating
quota: system to keep those greedy users from gobbling up 100% of the hard
quota: drive space.  Works with ext2, ext3, reiserfs, and xfs filesystems.
quota: This system is based on the Melbourne quota system by Robert Elz.
quota: Edvard Tuinder and Marco van Wieringen ported this code to Linux.
quota: Jan Kara added support for the new Linux quota format and the XFS
quota: filesystem.
quota:
quota:

PACKAGE NAME:  raidtools-1.00.3-i386-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  115 K
PACKAGE SIZE (uncompressed):  590 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
raidtools: raidtools (software RAID tools)
raidtools:
raidtools: The raidtools package includes the system utilities you need to set up
raidtools: and maintain a software RAID device (using two or more disk drives in
raidtools: combination for fault tolerance and improved performance) on a Linux
raidtools: system. 
raidtools:
raidtools:
raidtools:
raidtools:
raidtools:

PACKAGE NAME:  rpm-4.2.1-i486-3.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  1491 K
PACKAGE SIZE (uncompressed):  6330 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
rpm: rpm
rpm:
rpm: RPM is a tool from Red Hat Software used to install and remove
rpm: packages in the .rpm format.  When installing RPM packages on
rpm: Slackware, you may need to use the --nodeps and --force options.
rpm: Before installing any binary package, it's wise to examine it to
rpm: see what it's going to do, and if it will overwrite any files.  You
rpm: can use rpm2tgz to convert .rpm packages to .tgz packages so you
rpm: can look them over.
rpm:
rpm:

PACKAGE NAME:  screen-4.0.2-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  462 K
PACKAGE SIZE (uncompressed):  890 K
PACKAGE REQUIRED:  ncurses >= 5.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
screen: screen (terminal multiplexer)
screen: 
screen: Screen provides you with an ANSI/vt100 terminal emulator, which can 
screen: multiplex up to 10 pseudo-terminals. On startup, it executes $SHELL 
screen: in window 0. Then it reads $HOME/.screenrc to learn configuration, 
screen: keybindings, and possibly open more windows.
screen: 
screen: Juergen & Michael. (screen@uni-erlangen.de)
screen: GNU GENERAL PUBLIC LICENSE, Version 2, June 1991
screen: 
screen: 

PACKAGE NAME:  sg3_utils-1.20-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  199 K
PACKAGE SIZE (uncompressed):  880 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sg3_utils: sg3_utils (SCSI utilities)
sg3_utils: 
sg3_utils: This package contains utilities and test programs for the Linux
sg3_utils: SCSI subsystem. In the Linux 2.6 kernel series almost all of these
sg3_utils: programs will work on any devices that use the SCSI command set.
sg3_utils: Apart from SCSI parallel devices, ATAPI devices (CD/DVDs and tapes),
sg3_utils: USB mass storage devices, Fibre Channel disks and IEEE 1394 storage
sg3_utils: devices (that use the "SBP" protocol) use the SCSI command set.
sg3_utils: 
sg3_utils: Website: http://www.torque.net/sg
sg3_utils: License: GNU GPL
sg3_utils: Author: Doug Gilbert
sg3_utils: 

PACKAGE NAME:  sgml-tools-1.0.9-i486-12.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  2587 K
PACKAGE SIZE (uncompressed):  25950 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sgml-tools: sgml-tools (Utilities for working with SGML)
sgml-tools:
sgml-tools: SGML stands for Standard Generalized Markup Language.  This is a
sgml-tools: system which allows you to produce LaTeX, HTML, GNU info, LyX, RTF,
sgml-tools: and plain text (via groff) from a single source file in SGML.  It is
sgml-tools: often used for technical software documentation, such as the Linux
sgml-tools: HOWTO documents.  This package includes everything you need to use
sgml-tools: SGML -- all the standard SGML tools, OpenJade, and tools for working
sgml-tools: with DocBook documents (various DTDs).
sgml-tools:
sgml-tools:

PACKAGE NAME:  sox-12.18.1-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  166 K
PACKAGE SIZE (uncompressed):  670 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sox: sox (universal sound sample translator)
sox:
sox: Sox is a universal sound converter, player, and recorder.  It can
sox: play, record, and convert between several sound file formats such as
sox: .au, .snd, .voc and .wav.
sox:
sox:
sox:
sox:
sox:
sox:

PACKAGE NAME:  sudo-1.6.8p12-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  104 K
PACKAGE SIZE (uncompressed):  300 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sudo: sudo (give limited root privileges to certain users)
sudo:
sudo: 'sudo' is a command that allows users to execute some commands as 
sudo: root.  The /etc/sudoers file (edited with 'visudo') specifies which
sudo: users have access to sudo and which commands they can run.  'sudo' 
sudo: logs all its activities to /var/log/ so the system administrator
sudo: can keep an eye on things.
sudo:
sudo:
sudo:
sudo:

PACKAGE NAME:  sysfsutils-2.0.0-i486-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  69 K
PACKAGE SIZE (uncompressed):  310 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sysfsutils: sysfsutils (System Utilities Based on Sysfs)
sysfsutils: 
sysfsutils: This package's purpose is to provide a set of utilities for
sysfsutils: interfacing with sysfs, a virtual filesystem in Linux kernel
sysfsutils: versions 2.5+ that provides a tree of system devices. While a
sysfsutils: filesystem is a very useful interface, we've decided to provide
sysfsutils: a stable programming interface that will hopefully make it easier
sysfsutils: for applications to query system devices and their attributes.
sysfsutils: 
sysfsutils: 
sysfsutils: License: GNU LGPL
sysfsutils: Author: Ananth Mavinakayanahalli <ananth@in.ibm.com>
sysfsutils: Author: Daniel Stekloff <dsteklof@us.ibm.com>
sysfsutils: Author: Mohan Kumar <mohan@in.ibm.com>

PACKAGE NAME:  tetradraw-2.0.2-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  39 K
PACKAGE SIZE (uncompressed):  340 K
PACKAGE REQUIRED:  ncurses >= 5.4,gpm >= 1.19
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tetradraw: TetraDraw (Text art drawing editor)
tetradraw: 
tetradraw: You won't believe that this can be done on a text mode !
tetradraw: All source code is licensed under the GPL.
tetradraw: All artwork is owned by the artists.
tetradraw: 
tetradraw: Author: John McCutchan
tetradraw: 
tetradraw: 

PACKAGE NAME:  texinfo-4.8-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  619 K
PACKAGE SIZE (uncompressed):  1950 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
texinfo: texinfo (GNU software documentation system)
texinfo:
texinfo: 'Texinfo' is a documentation system that uses a single source file to
texinfo: produce both on-line information and printed output.  Using Texinfo,
texinfo: you can create a printed document with the normal features of a book,
texinfo: including chapters, sections, cross references, and indices.  From the
texinfo: same Texinfo source file, you can create a menu-driven, on-line Info
texinfo: file with nodes, menus, cross references, and indices.
texinfo:
texinfo: This package is needed to read the documentation files in /usr/info.
texinfo:

PACKAGE NAME:  traceroute-1.4a12-i386-2.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
traceroute: traceroute (IP packet route tracing utility)
traceroute:
traceroute: The traceroute utility displays the route used by IP packets on their
traceroute: way to a specified network host.  Traceroute will display the IP
traceroute: number and host name (if possible) of all the machines along the route
traceroute: taken by the packets.  If you're having network connectivity problems,
traceroute: traceroute can show you where the trouble is located.
traceroute:
traceroute:
traceroute:
traceroute:

PACKAGE NAME:  unrar-3.5.4-i686-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  72 K
PACKAGE SIZE (uncompressed):  180 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
unrar: unrar 3.5.4 (RAR unpack/decompress utility)
unrar:
unrar: RAR is the native format of WinRAR archiver. Like other
unrar: archives, RAR files are data containers, they store one
unrar: or several files in the compressed form.
unrar:
unrar: unRAR only unpack/decompress RAR files.
unrar: The license is freeware (not GPL).
unrar:
unrar: Homepage: http://www.rarlab.com
unrar: Packaged for VectorLinux by Sergew Popov (faijeya@gmail.com)

PACKAGE NAME:  unrpm-51_static-i386-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  82 K
PACKAGE SIZE (uncompressed):  250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
unrpm: unrpm (rpm/tgz/deb/slp package converter)
unrpm: 
unrpm: This package consist of a few programs and scripts that allow
unrpm: you to install, convert, and unpack redhat.X.rpm, slackware.tgz,
unrpm: debian.deb, and tampede.slp packages.
unrpm: 
unrpm: Website: gone
unrpm: License: GNU GPL
unrpm: Author: Kent Robotti <krobot@erols.com>
unrpm: 

PACKAGE NAME:  vcdimager-0.7.23-i686-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  459 K
PACKAGE SIZE (uncompressed):  2410 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vcdimager: vcdimager (VCD Mastering)
vcdimager: 
vcdimager: This is GNU VCDImager, the GNU (Super)VideoCD authoring
vcdimager: solution for mastering, extracting and analyzing Video
vcdimager: CDs and Super Video CDs.
vcdimager: 
vcdimager: Website: http://www.vcdimager.org/

PACKAGE NAME:  vcpufreq-1.0.2-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  bash >= 3.0,gambas >= 1.0.15
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  gksu >= 1.0.7
PACKAGE DESCRIPTION:
vcpufreq: vcpufreq (cpufreq configuration utility)
vcpufreq: 
vcpufreq: vcpufreq is a cpufreq configuration utility developed in Gambas by 
vcpufreq: Joe1962 for Vector Linux. It makes it easy to change cpufreq governor 
vcpufreq: and related frequency settings. It does not (yet) load the apropiate 
vcpufreq: cpufreq module for your system. Now with CLI vcpufreq-load to set 
vcpufreq: saved config on system start.
vcpufreq: 
vcpufreq: Joe1962 <joe1962@users.sourceforge.net>
vcpufreq: GNU LIBRARY GENERAL PUBLIC LICENSE, Version 2, June 1991
vcpufreq: 

PACKAGE NAME:  vcpufreq-1.0.2-i586-5vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  bash >= 3.0,gambas-runtime >= 1.0.17 | gambas >= 1.0.17
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  gksu >= 1.0.7
PACKAGE DESCRIPTION:
vcpufreq: vcpufreq (cpufreq configuration utility)
vcpufreq: 
vcpufreq: vcpufreq is a cpufreq configuration utility developed in Gambas by 
vcpufreq: Joe1962 for Vector Linux. It makes it easy to change cpufreq governor 
vcpufreq: and related frequency settings. It does not (yet) load the apropiate 
vcpufreq: cpufreq module for your system. Now with CLI vcpufreq-load to set 
vcpufreq: saved config on system start.
vcpufreq: 
vcpufreq: Joe1962 <joe1962@users.sourceforge.net>
vcpufreq: GNU LIBRARY GENERAL PUBLIC LICENSE, Version 2, June 1991
vcpufreq: 

PACKAGE NAME:  vorbis-tools-1.1.1-i486-3.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  128 K
PACKAGE SIZE (uncompressed):  550 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vorbis-tools: vorbis-tools (Ogg Vorbis Tools)
vorbis-tools:
vorbis-tools: The vorbis-tools package contains several basic tools for working with
vorbis-tools: compressed audio files in the Ogg Vorbis (.ogg) format:
vorbis-tools:
vorbis-tools:   oggenc (an .ogg encoder), ogg123 (a playback tool), vorbiscomment
vorbis-tools:   (add comments to vorbis files), ogginfo (show information about an
vorbis-tools:   ogg file), oggdec (a command line decoder), and vcut (a tool for
vorbis-tools:   splitting vorbis files).
vorbis-tools:
vorbis-tools: These tools require the libao, libogg, and libvorbis libraries.

PACKAGE NAME:  xdelta-1.1.3-i586-4vl58.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  100 K
PACKAGE SIZE (uncompressed):  430 K
PACKAGE REQUIRED:  bash >= 3.0,glib >= 1.2.10,zlib >= 1.2.2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xdelta: Xdelta 1.1.3 - A binary delta generator
xdelta: 
xdelta: Xdelta provides the ability to generate deltas between a pair
xdelta: of files and later apply those deltas.  It operates similar to
xdelta: the diff and patch commands, but works on binary files and does
xdelta: not produce a human readable output.
xdelta: 
xdelta: AUTHOR: Joshua MacDonald.
xdelta: HOME PAGE: http://xdelta.sourceforge.net.
xdelta: LICENSE: GNU GPL
xdelta: 

PACKAGE NAME:  xfsdump-2.2.38_1-i486-1.tlz
PACKAGE LOCATION:  ./base-apps
PACKAGE SIZE (compressed):  295 K
PACKAGE SIZE (uncompressed):  860 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfsdump: xfsdump (backup tools for the XFS filesystem)
xfsdump:
xfsdump: The xfsdump package contains the xfsdump and xfsrestore utilities for
xfsdump: backing up and restoring XFS partitions.  xfsdump examines files in a
xfsdump: filesystem, determines which need to be backed up, and copies those
xfsdump: files to a specified disk, tape or other storage medium.  xfsrestore
xfsdump: performs the inverse function of xfsdump; it can restore a full
xfsdump: or incremental backup of a filesystem.
xfsdump:
xfsdump:
xfsdump:

PACKAGE NAME:  aaa_base-11.0.0-noarch-2.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  10 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
aaa_base: aaa_base (Basic Linux filesystem package)
aaa_base:
aaa_base: Sets up the empty directory tree for Slackware and adds an email to
aaa_base: root's mailbox welcoming them to Linux. :)  This package should be
aaa_base: installed first, and never uninstalled.
aaa_base:
aaa_base:
aaa_base:
aaa_base:
aaa_base:
aaa_base:

PACKAGE NAME:  aaa_elflibs-11.0.0-i486-9.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  2963 K
PACKAGE SIZE (uncompressed):  10430 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
aaa_elflibs: aaa_elflibs (shared libraries needed by many programs)
aaa_elflibs:
aaa_elflibs: This is a collection of shared libraries needed to run Linux programs.
aaa_elflibs: ELF (Executable and Linking Format) is the standard Linux binary 
aaa_elflibs: format.  These libraries are gathered from other Slackware packages
aaa_elflibs: and are intended to give a fairly complete initial set of libraries.
aaa_elflibs: This package should be not upgraded or reinstalled (it could copy
aaa_elflibs: over newer library versions).
aaa_elflibs:
aaa_elflibs:
aaa_elflibs:

PACKAGE NAME:  acl-2.2.39_1-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  122 K
PACKAGE SIZE (uncompressed):  350 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
acl: acl (tools for using POSIX Access Control Lists)
acl:
acl: This package contains a set of tools and libraries for manipulating
acl: POSIX Access Control Lists.  POSIX Access Control Lists (defined in
acl: POSIX 1003.1e draft standard 17) are used to define more fine-grained
acl: discretionary access rights for files and directories.
acl:
acl:
acl:
acl:
acl:

PACKAGE NAME:  acpid-1.0.4-i486-2.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
acpid: acpid (ACPI daemon)
acpid:
acpid: Most modern computers support the Advanced Configuration and Power
acpid: Interface (ACPI) standard to allow intelligent power management.
acpid: This package contains acpid, which is the user-space daemon needed in
acpid: order to make the Linux ACPI support completely functional.
acpid:
acpid: ACPI must be compiled into the kernel to run acpid.
acpid:
acpid:
acpid:

PACKAGE NAME:  apmd-3.0.2-i386-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  43 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
apmd: apmd (Advanced Power Management daemon)
apmd:
apmd: apmd is an APM monitoring daemon, and works in conjunction with the
apmd: APM BIOS driver in the kernel.  Apmd (and the included tools) handle
apmd: tasks such as automatically putting a laptop into suspend when the
apmd: power level drop below a certain point.  This package also includes
apmd: the graphical power management tools xapm and xbattery.
apmd:
apmd: The apmd tools were written by Rik Faith and are maintained by
apmd: Avery Pennarun.  xbattery was written by Nathan Sidwell.
apmd:

PACKAGE NAME:  attr-2.4.32_1-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  63 K
PACKAGE SIZE (uncompressed):  220 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
attr: attr (tools for using extended attributes on filesystems)
attr:
attr: This package contains a set of tools for manipulating extended
attr: attributes (name:value pairs associated permanently with files and
attr: directories) on filesystem objects, and the library and header files
attr: needed to develop programs which make use of extended attributes.
attr: Extended attributes are used to provide additional functionality to
attr: a filesystem.  For example, Access Control Lists (ACLs) are
attr: implemented using extended attributes.
attr:
attr:

PACKAGE NAME:  bash-3.1.017-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  573 K
PACKAGE SIZE (uncompressed):  1570 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bash: bash (sh-compatible shell)
bash:
bash: The GNU Bourne-Again SHell.  Bash is a sh-compatible command
bash: interpreter that executes commands read from the standard input or
bash: from a file.  Bash also incorporates useful features from the Korn
bash: and C shells (ksh and csh).  Bash is ultimately intended to be a
bash: conformant implementation of the IEEE Posix Shell and Tools
bash: specification (IEEE Working Group 1003.2).
bash:
bash: Bash must be present for the system to boot properly.
bash:

PACKAGE NAME:  bin-11.0-i486-3.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  477 K
PACKAGE SIZE (uncompressed):  1560 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bin: bin (some common system utilities)
bin:
bin: The "bin" package is a collection of utilities for handling various
bin: kinds of archives, identifying file types, and processing data.
bin: Several of these tools are used by system scripts, so this is a
bin: required package.  The bin package contains these programs:
bin:
bin: bban compress diskcopy dosfsck ed eject fbset file fiz fromdos lha
bin: mkdosfs mktemp patch rescan-scsi-bus rpm2targz rpmoffset run-parts
bin: savelog splitvt sysvbanner tempfile time todos tree unarj volname
bin: which xx zoo

PACKAGE NAME:  bzip2-1.0.3-i486-3.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  103 K
PACKAGE SIZE (uncompressed):  440 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bzip2: bzip2 (a block-sorting file compressor)
bzip2:
bzip2: Bzip2 compresses files using the Burrows-Wheeler block sorting text
bzip2: compression algorithm, and Huffman coding.  Compression is generally
bzip2: considerably better than that achieved by more conventional LZ77/LZ78-
bzip2: based compressors, and approaches the performance of the PPM family of
bzip2: statistical compressors. 
bzip2:
bzip2: Julian Seward <jseward@acm.org> is the author of bzip2.
bzip2:
bzip2:

PACKAGE NAME:  checkinstall-1.6.0_p4-i586-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  37 K
PACKAGE SIZE (uncompressed):  170 K
PACKAGE REQUIRED:  bash >= 3.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
checkinstall: checkinstall (install tracker and package maker)
checkinstall: 
checkinstall: CheckInstall keeps track of the install process (make install)
checkinstall: then build a package. This version has been hacked to support
checkinstall: new symlink creation, slapt-get dependency, and tgz/tlz/tbz
checkinstall: Slackware package format.
checkinstall: 
checkinstall: Website: http://checkinstall.sourceforge.net
checkinstall: Licence: GNU GPL
checkinstall: Author: Felipe Eduardo Sanchez Diaz Duran <izto@asic-linux.com.mx>
checkinstall: Hacker: Eko M. Budi, Vector Linux

PACKAGE NAME:  coreutils-5.97-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  1387 K
PACKAGE SIZE (uncompressed):  7840 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
coreutils: coreutils (core GNU utilities)
coreutils:
coreutils: These are the GNU core utilities, the basic command line programs
coreutils: such as 'mkdir', 'ls', and 'rm' that are needed for the system to
coreutils: run.  This package is the union of the GNU fileutils, sh-utils, and
coreutils: textutils packages.  Most of these programs have significant
coreutils: advantages over their Unix counterparts, such as greater speed,
coreutils: additional options, and fewer arbitrary limits.
coreutils:
coreutils:
coreutils:

PACKAGE NAME:  cpio-2.5-i386-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  60 K
PACKAGE SIZE (uncompressed):  190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cpio: cpio (backup and archiving utility)
cpio:
cpio: This is GNU cpio, a program to manage archives of files. This package
cpio: also includes mt, a tape drive control program. cpio copies files into
cpio: or out of a cpio or tar archive, which is a file that contains other
cpio: files plus information about them, such as their pathname, owner,
cpio: timestamps, and access permissions. The archive can be another file on
cpio: the disk, a magnetic tape, or a pipe.
cpio:
cpio:
cpio:

PACKAGE NAME:  cups-1.2.6-i586-2vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  2421 K
PACKAGE SIZE (uncompressed):  11870 K
PACKAGE REQUIRED:  bash >= 3.1.017,gnutls >= 1.0.25,libtasn1 >= 0.2.17,libgcrypt >= 1.2.1,zlib >= 1.2.3,openssl >= 0.9.8d,libgpg-error >= 1.0,libtiff >= 3.8.2,libpng >= 1.2.12,libjpeg >= 6b,cxxlibs >= 6.0.3,gcc >= 3.4.6,openslp >= 1.2.1,openldap-client >= 2.3.27,dbus >= 0.62,acl >= 2.2.39_1,cyrus-sasl >= 2.1.22,attr >= 2.4.32_1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cups: CUPS (Common UNIX Printing System)
cups:
cups: The Common UNIX Printing System provides a portable printing layer for
cups: UNIX(R)-like operating systems. It has been developed by Easy Software
cups: Products to promote a standard printing solution for all UNIX vendors
cups: and users.  CUPS uses the Internet Printing Protocol ("IPP") as the
cups: basis for managing print jobs and queues.  The CUPS package includes
cups: System V and Berkeley command-line interfaces, a PostScript RIP
cups: package for supporting non-PostScript printer drivers, and tools for
cups: creating additional printer drivers and other CUPS services.
cups:

PACKAGE NAME:  cups-1.2.8-i586-2vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  2654 K
PACKAGE SIZE (uncompressed):  13040 K
PACKAGE REQUIRED:  bash >= 3.1.017,gnutls >= 1.6.0,libgcrypt >= 1.2.3,libgpg-error >= 1.3,libtasn1 >= 0.2.17,zlib >= 1.2.3,libtiff >= 3.8.2,libpng >= 1.2.12,libjpeg >= 6b,cxxlibs >= 6.0.3,gcc >= 3.4.6,openslp >= 1.2.1,openldap-client >= 2.3.27,dbus >= 0.62,acl >= 2.2.39_1,openssl >= 0.9.8d,cyrus-sasl >= 2.1.22,attr >= 2.4.32_1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cups: CUPS (Common UNIX Printing System)
cups:
cups: The Common UNIX Printing System provides a portable printing layer for
cups: UNIX(R)-like operating systems. It has been developed by Easy Software
cups: Products to promote a standard printing solution for all UNIX vendors
cups: and users.  CUPS uses the Internet Printing Protocol ("IPP") as the
cups: basis for managing print jobs and queues.  The CUPS package includes
cups: System V and Berkeley command-line interfaces, a PostScript RIP
cups: package for supporting non-PostScript printer drivers, and tools for
cups: creating additional printer drivers and other CUPS services.
cups:

PACKAGE NAME:  cxxlibs-6.0.3-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  745 K
PACKAGE SIZE (uncompressed):  3740 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cxxlibs: cxxlibs (C++ shared library compatibility package)
cxxlibs:
cxxlibs: This package contains the shared libraries needed to run dynamically
cxxlibs: linked C++ binaries linked with older versions of libstdc++.
cxxlibs:
cxxlibs:
cxxlibs:
cxxlibs:
cxxlibs:
cxxlibs:
cxxlibs:

PACKAGE NAME:  dbus-0.62-i586-5vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  381 K
PACKAGE SIZE (uncompressed):  1780 K
PACKAGE REQUIRED:  bash >= 3.1.017,glib2 >= 2.10.3,expat >= 1.95.8,x11 >= 6.9.0,gtk+2 >= 2.8.20,atk >= 1.10.3,pango >= 1.12.4,cairo >= 1.0.4,libpng >= 1.2.12,fontconfig >= 2.2.3,freetype >= 2.1.9,zlib >= 1.2.3,cxxlibs >= 6.0.3,gcc >= 3.4.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dbus: dbus message bus system
dbus: 
dbus: dbus is a message bus system, a simple way for applications to talk to 
dbus: each other. 
dbus: 
dbus: 
dbus: 
dbus: 
dbus: 
dbus: 
dbus: 
dbus: 
dbus: 

PACKAGE NAME:  dcron-2.3.3-i486-5.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dcron: dcron (Dillon's Cron daemon)
dcron:
dcron: The cron daemon runs in the background and executes tasks on behalf of
dcron: users at the appropriate time.  Many timed system tasks are started
dcron: with cron, such as the nightly indexing with updatedb.
dcron:
dcron: dcron was written entirely from scratch by Matthew Dillon.
dcron:
dcron:
dcron:
dcron:

PACKAGE NAME:  devs-2.3.1-noarch-25.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  56 K
PACKAGE SIZE (uncompressed):  5020 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
devs: devs (system device files)
devs:
devs: This package creates special files in the /dev directory that 
devs: represent your system's hardware, and a tool (/dev/MAKEDEV) for
devs: creating new device files.  These files are required to access
devs: hardware on a Linux system.
devs:
devs:
devs:
devs:
devs:

PACKAGE NAME:  e2fsprogs-1.38-i486-2.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  380 K
PACKAGE SIZE (uncompressed):  1260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
e2fsprogs: e2fsprogs
e2fsprogs:
e2fsprogs: Utilities needed to create and maintain ext2 and ext3 filesystems.
e2fsprogs:
e2fsprogs: These utilities were written by Remy Card (the developer and
e2fsprogs: maintainer of the ext2 fs) and Theodore T'so.
e2fsprogs:
e2fsprogs:
e2fsprogs:
e2fsprogs:
e2fsprogs:

PACKAGE NAME:  etc-11.0-noarch-2.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  199 K
PACKAGE SIZE (uncompressed):  820 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
etc: etc (system configuration files)
etc:
etc: System configuration files.  The /etc directory is traditionally the
etc: location where configuration files are found.
etc:
etc:
etc:
etc:
etc:
etc:
etc:

PACKAGE NAME:  findutils-4.2.28-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  211 K
PACKAGE SIZE (uncompressed):  780 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
findutils: findutils (utilities to locate files)
findutils:
findutils: This package contains the GNU find and xargs programs.  The find and
findutils: xargs implementations comply with POSIX 1003.2.  They also support
findutils: some additional options, some borrowed from Unix and some unique to
findutils: GNU.
findutils:
findutils:
findutils:
findutils:
findutils:

PACKAGE NAME:  floppy-5.4-i386-3.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  319 K
PACKAGE SIZE (uncompressed):  720 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
floppy: floppy (floppy disk utilities)
floppy:
floppy: Contains fdutils-5.4, tools to test and format floppy disks; and
floppy: mtools-3.9.8, a collection of utilities for using DOS/Windows floppy
floppy: disks with Linux.
floppy:
floppy:
floppy:
floppy:
floppy:
floppy:

PACKAGE NAME:  fuse-2.6.1-i586-3vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  133 K
PACKAGE SIZE (uncompressed):  580 K
PACKAGE REQUIRED:  bash >= 3.1.017
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fuse: FUSE (Filesystem in Userspace)
fuse: 
fuse: FUSE (Filesystem in Userspace) is a simple interface for userspace 
fuse: programs to export a virtual filesystem to the Linux kernel. FUSE 
fuse: also aims to provide a secure method for non privileged users to 
fuse: create and mount their own filesystem implementations.
fuse: 
fuse: 
fuse: Miklos Szeredi <miklos@szeredi.hu>
fuse: http://fuse.sourceforge.net/
fuse: GNU GENERAL PUBLIC LICENSE, Version 2, June 1991
fuse: 

PACKAGE NAME:  gambas-runtime-1.0.17-i586-5vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  440 K
PACKAGE SIZE (uncompressed):  1870 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.3,gcc-g++ >= 3.4.6,x11 >= 6.9.0,qt >= 3.3.5,kdelibs >= 3.5.4,arts >= 1.5.4,gtk+2 >= 2.8.20,SDL >= 1.2.9,SDL_mixer >= 1.2.6,SDL_image >= 1.2.4,SDL_gfx >= 2.0.13,SDL_ttf >= 2.0.7,bzip2 >= 1.0.3,zlib >= 1.2.3,sqlite >= 2.8.17,postgresql >= 8.1.4,mysql >= 5.0.24a,gettext >= 0.15,pcre >= 6.7,curl >= 7.15.5,openldap-client >= 2.3.27,libxml2 >= 2.6.26,libxslt >= 1.1.17,glibc-solibs >= 2.3.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  openssl
PACKAGE DESCRIPTION:
gambas-runtime: Gambas runtime (BASIC runtime)
gambas-runtime: 
gambas-runtime: GAMBAS is a free implementation of a graphical development 
gambas-runtime: environment based on a BASIC interpreter. It is very inspired by 
gambas-runtime: Visual Basic and Java. It is NOT a VB clone!
gambas-runtime: 
gambas-runtime: Benoit Minisini, http://gambas.sourceforge.net
gambas-runtime: GNU GENERAL PUBLIC LICENSE, Version 2, June 1991
gambas-runtime: 
gambas-runtime: Packaged with support for sqlite, postgresql and mysql.
gambas-runtime: 

PACKAGE NAME:  gawk-3.1.5-i486-3.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  693 K
PACKAGE SIZE (uncompressed):  1930 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gawk: gawk (pattern scanning and processing language)
gawk:
gawk: Gawk is the GNU Project's implementation of the AWK programming
gawk: language.  It conforms to the definition of the language in the POSIX
gawk: 1003.2 Command Language And Utilities Standard.  This version in turn
gawk: is based on the description in The AWK Programming Language, by Aho,
gawk: Kernighan, and Weinberger, with the additional features found in the
gawk: System V Release 4 version of UNIX awk.  Gawk also provides more
gawk: recent Bell Labs awk extensions, and some GNU-specific extensions.
gawk:
gawk:

PACKAGE NAME:  genpower-1.0.5-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  41 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
genpower: genpower (UPS monitoring daemon)
genpower:
genpower: The genpower daemon, genpowerd, will monitor the status of a serial
genpower: line connected to a UPS (Uninterruptible Power Supply).  If a power
genpower: failure is detected, genpowerd will notify the system to take the
genpower: needed steps to react to the condition of the UPS.  This may include
genpower: shutting the system down, or canceling a pending shutdown if the
genpower: power is restored.
genpower:
genpower:
genpower:

PACKAGE NAME:  gettext-0.15-i586-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  1721 K
PACKAGE SIZE (uncompressed):  9530 K
PACKAGE REQUIRED:  libiconv >= 1.11,bash >= 3.1.017,cxxlibs >= 6.0.3,gcc >= 3.4.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gettext: gettext (GNU gettext)
gettext: 
gettext: This is the GNU gettext package. It is interesting for authors or 
gettext: maintainers of other packages or programs which they want to see 
gettext: internationalized.  As one step the handling of messages in different 
gettext: languages should be implemented.  For this task GNU gettext provides 
gettext: the needed tools and library functions.
gettext: 
gettext: http://www.gnu.org/software/gettext/
gettext: GNU GENERAL PUBLIC LICENSE, Version 2, June 1991
gettext: 

PACKAGE NAME:  getty-ps-2.1.0b-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  57 K
PACKAGE SIZE (uncompressed):  200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
getty-ps: getty-ps
getty-ps:
getty-ps: /sbin/getty and /sbin/uugetty. 
getty-ps: These control the process of logging into your system, and may be used
getty-ps: instead of 'agetty', which is the default getty included with the
getty-ps: util-linux package. getty-ps supports a number of enhancements such as
getty-ps: ringback support.
getty-ps:
getty-ps: getty-ps was originally written by Paul Sutcliffe, Jr, and is
getty-ps: currently maintained by Christine Jamison.
getty-ps:

PACKAGE NAME:  glibc-solibs-2.3.6-i486-6.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  2198 K
PACKAGE SIZE (uncompressed):  10440 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glibc-solibs: glibc-solibs (shared GNU C libraries)
glibc-solibs:
glibc-solibs: This package contains the shared libraries, binaries, and support
glibc-solibs: files required to run most Linux applications linked with glibc.
glibc-solibs:
glibc-solibs:
glibc-solibs:
glibc-solibs:
glibc-solibs:
glibc-solibs:
glibc-solibs:

PACKAGE NAME:  glibc-zoneinfo-2.3.6-noarch-6.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  140 K
PACKAGE SIZE (uncompressed):  2990 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glibc-zoneinfo: glibc-zoneinfo (time zone database)
glibc-zoneinfo:
glibc-zoneinfo: This package allows you to configure your time zone.
glibc-zoneinfo:
glibc-zoneinfo: This database comes from glibc, and is based on the tzdata package by
glibc-zoneinfo: Arthur David Olson et.al.  The latest version and more information
glibc-zoneinfo: may be found at ftp://elsie.nci.nih.gov/pub/
glibc-zoneinfo:
glibc-zoneinfo: Use the timeconfig utility to set your local time zone.
glibc-zoneinfo:
glibc-zoneinfo:

PACKAGE NAME:  gpm-1.20.1-i486-2.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  178 K
PACKAGE SIZE (uncompressed):  540 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gpm: gpm (general purpose mouse server)
gpm:
gpm: The general purpose mouse server, or gpm, allows you to use the mouse
gpm: to cut and paste text from the screen.  It also acts as a mouse 
gpm: server for applications running on the Linux console, such as the
gpm: Midnight Commander file manager. 
gpm:
gpm: NOTE:  This program may cause problems when you start X on systems 
gpm: that do not use a serial mouse.  If you get an 'unable to open mouse 
gpm: device' error from X, disable /etc/rc.d/rc.gpm.
gpm:

PACKAGE NAME:  grep-2.5-i486-3.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  165 K
PACKAGE SIZE (uncompressed):  550 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
grep: grep (print lines matching a pattern)
grep:
grep: This is GNU grep, the "fastest grep in the west" (we hope).  Grep
grep: searches through textual input for lines which contain a match to a
grep: specified pattern and then prints the matching lines.
grep:
grep:
grep:
grep:
grep:
grep:

PACKAGE NAME:  gzip-1.3.5-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  75 K
PACKAGE SIZE (uncompressed):  190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gzip: gzip (file compression utility)
gzip:
gzip: Gzip reduces the size of the named files using Lempel-Ziv coding
gzip: (LZ77).  Whenever possible, each file is replaced by one with the
gzip: extension .gz, while keeping the same ownership modes, access and
gzip: modification times.
gzip:
gzip:
gzip:
gzip:
gzip:

PACKAGE NAME:  hdparm-6.6-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  33 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hdparm: hdparm (read/set hard drive parameters)
hdparm:
hdparm: hdparm provides a command line interface to various hard disk ioctls
hdparm: supported by the Linux ATA/IDE device driver subsystem.  This may be
hdparm: required to enable higher-performing disk modes.
hdparm:
hdparm: hdparm was written by Mark Lord.
hdparm:
hdparm:
hdparm:
hdparm:

PACKAGE NAME:  hwdata-0.117-i586-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  183 K
PACKAGE SIZE (uncompressed):  1030 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hwdata: HWDATA (hardware info database)
hwdata: 
hwdata: Used by vlsetup to autodetect hardware
hwdata: 
hwdata: 
hwdata: 

PACKAGE NAME:  infozip-5.52-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  207 K
PACKAGE SIZE (uncompressed):  610 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
infozip: infozip (Info-ZIP's zip and unzip utilities)
infozip:
infozip: zip is a compression and file packaging utility for Unix, VMS, MSDOS,
infozip: OS/2, Windows NT, Minix, Atari and Macintosh, Amiga and Acorn RISC OS.
infozip: It is analogous to a combination of the UNIX commands tar(1) and
infozip: compress(1) and is compatible with PKZIP (Phil Katz's ZIP).  A
infozip: companion program (unzip(1L)), unpacks zip archives.
infozip:
infozip:
infozip:
infozip:

PACKAGE NAME:  isapnptools-1.26-i386-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  85 K
PACKAGE SIZE (uncompressed):  280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
isapnptools: isapnptools (ISA Plug-And-Play tools)
isapnptools:
isapnptools: These programs allow ISA Plug-And-Play devices to be configured
isapnptools: on a Linux machine.
isapnptools:
isapnptools:
isapnptools:
isapnptools:
isapnptools:
isapnptools:
isapnptools:

PACKAGE NAME:  kbd-1.12-i486-2.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  901 K
PACKAGE SIZE (uncompressed):  2840 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
kbd: kbd (keyboard maps and console fonts)
kbd:
kbd: Load and save keyboard mappings.  Needed if you are not using the US
kbd: keyboard map.  This package also contains utilities to change your
kbd: console fonts - if you install it you'll get a menu later on that lets
kbd: you select from many different fonts.  If you like one, you can make
kbd: it your default font.  A new default font can be chosen at any time by
kbd: typing 'setconsolefont'.
kbd:
kbd:
kbd:

PACKAGE NAME:  less-394-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  90 K
PACKAGE SIZE (uncompressed):  220 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
less: less (file pager)
less:
less: Less is a paginator similar to more (1), but which allows backward
less: movement in the file as well as forward movement. Also, less does not
less: have to read the entire input file before starting, so with large
less: input files it starts up faster than text editors like vi (1). 
less:
less: Less was written by Mark Nudelman.
less:
less:
less:

PACKAGE NAME:  libiconv-1.11-i586-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  558 K
PACKAGE SIZE (uncompressed):  2420 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libiconv: libiconv (GNU iconv() implementation)
libiconv: 
libiconv: This library provides an iconv() implementation, for use on systems 
libiconv: which don't have one, or whose implementation cannot convert from/to 
libiconv: Unicode.
libiconv: 
libiconv: Bruno Haible <bruno@clisp.org>
libiconv: http://www.gnu.org/software/libiconv/
libiconv: GNU GENERAL PUBLIC LICENSE, Version 2, June 1991
libiconv: 

PACKAGE NAME:  lilo-22.7.2.1-i486-2.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  232 K
PACKAGE SIZE (uncompressed):  830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lilo: lilo (Linux Loader)
lilo:
lilo: Generic Boot Loader for Linux ('LInux LOader') by Werner Almesberger.
lilo: LILO boots Linux from your hard drive. It can also boot other
lilo: operating systems such as MS-DOS and OS/2, and can even boot DOS from
lilo: the second hard drive. LILO comes with utilities and documentation
lilo: that make it easier to install, such as 'liloconfig' and 'QuickStart'.
lilo: NOTE: Installing boot loaders is inherently dangerous. Be sure to have
lilo: some means to boot your system from a different media if you install
lilo: LILO on your hard disk.
lilo:

PACKAGE NAME:  linux_logo-4.01.vl-i586-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
linux_logo: linux_logo (Text mode Tux with system info)
linux_logo: 
linux_logo: by Vince Weaver (vince@deater.net, http://www.deater.net/weave )
linux_logo: Custom Vector Logo by Eko M. Budi
linux_logo: 

PACKAGE NAME:  logrotate-3.7.4-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  29 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
logrotate: logrotate (system log rotation tool)
logrotate:
logrotate: The logrotate utility is designed to simplify the administration
logrotate: of log files on a system which generates a lot of log files.
logrotate: Logrotate allows for the automatic rotation compression, removal
logrotate: and mailing of log files.  Logrotate can be set to handle a log
logrotate: file daily, weekly, monthly or when the log file gets to a certain
logrotate: size.  Normally, logrotate runs as a daily cron job.
logrotate:
logrotate:
logrotate:

PACKAGE NAME:  lzma-4.32.0_b1-i586-4vl58.tgz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  120 K
PACKAGE SIZE (uncompressed):  340 K
PACKAGE REQUIRED:  cxxlibs >= 5.0,gcc-g++ >= 3.3,bash >= 3.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lzma: lzma (compression utilities)
lzma: 
lzma: LZMA provides very high compression ratio and fast decompression.
lzma: The core of the LZMA utils is Igor Pavlov's LZMA SDK containing
lzma: the actual LZMA encoder/decoder (http://7-zip.org/sdk.html).
lzma: LZMA utils add a few scripts which provide gzip-like command line
lzma: interface and a couple of other LZMA related tools.
lzma: 
lzma: Website: http://tukaani.org/lzma/
lzma: License: GNU GPL

PACKAGE NAME:  mingetty-0.9.4_p1-i586-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  5 K
PACKAGE SIZE (uncompressed):  20 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mingetty: MinGeTTY (light getty login for console)
mingetty: 
mingetty: Minimum getty program that can only be used as console
mingetty: getty for Linux. This getty is about half the size from
mingetty: agetty and very well suited for a Greased-Weasel(tm)-based
mingetty: System (better known as Linux).  :-)
mingetty: 
mingetty: Florian La Roche
mingetty: florian@suse.de
mingetty: florian@jurix.jura.uni-sb.de

PACKAGE NAME:  mkinitrd-1.0.1-i486-3.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  304 K
PACKAGE SIZE (uncompressed):  350 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mkinitrd: mkinitrd (make an initial ramdisk)
mkinitrd:
mkinitrd: mkinitrd is a script to create an initial ramdisk that is loaded at
mkinitrd: the same time as the kernel.  The initial ramdisk may be responsible
mkinitrd: for loading kernel modules (such a filesystem or SCSI controller
mkinitrd: module) that are needed to mount the root filesystem.
mkinitrd:
mkinitrd:
mkinitrd:
mkinitrd:
mkinitrd:

PACKAGE NAME:  module-init-tools-3.2.2-i486-2.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  481 K
PACKAGE SIZE (uncompressed):  2100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
module-init-tools: module-init-tools (kernel module utilities)
module-init-tools:
module-init-tools: Utilities to load and unload kernel modules.  These are used on Linux
module-init-tools: to load extra drivers or other features into the running kernel.
module-init-tools:
module-init-tools: This package includes both module-init-tools (the module utilities for
module-init-tools: for 2.6.x Linux kernels) and modutils (for 2.4.x kernels).
module-init-tools:
module-init-tools:
module-init-tools:
module-init-tools:

PACKAGE NAME:  ntfs-3g-1.0-i586-1vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  200 K
PACKAGE SIZE (uncompressed):  710 K
PACKAGE REQUIRED:  fuse >= 2.6.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ntfs-3g: NTFS-3G (FUSE NTFS filesystem driver)
ntfs-3g: 
ntfs-3g: The NTFS-3G driver is an open source, freely available NTFS driver 
ntfs-3g: for Linux with read and write support. It provides safe and fast 
ntfs-3g: handling of the Windows XP, Windows Server 2003 and Windows 2000 file 
ntfs-3g: systems. Most POSIX file system operations are supported, with the 
ntfs-3g: notable exception of file ownership and access right changes.
ntfs-3g: 
ntfs-3g: http://www.ntfs-3g.org/
ntfs-3g: GNU GENERAL PUBLIC LICENSE, Version 2, June 1991
ntfs-3g: 

PACKAGE NAME:  openssl-solibs-0.9.8d-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  661 K
PACKAGE SIZE (uncompressed):  2040 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
openssl-solibs: openssl-solibs (OpenSSL shared libraries)
openssl-solibs:
openssl-solibs: These shared libraries provide encryption routines required by
openssl-solibs: programs such as openssh.  They are also used by KDE's Konqueror web
openssl-solibs: browser to provide secure web connections.
openssl-solibs:
openssl-solibs: This product includes software developed by the OpenSSL Project for
openssl-solibs: use in the OpenSSL Toolkit (http://www.openssl.org).  This product
openssl-solibs: includes cryptographic software written by Eric Young
openssl-solibs: (eay@cryptsoft.com).  This product includes software written by Tim
openssl-solibs: Hudson (tjh@cryptsoft.com).

PACKAGE NAME:  pciutils-2.2.3-i486-2.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  160 K
PACKAGE SIZE (uncompressed):  680 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pciutils: pciutils (PCI utilities)
pciutils:
pciutils: lspci displays detailed information about all PCI buses and devices
pciutils: in the system, replacing the original /proc/pci interface.
pciutils:
pciutils: setpci allows reading from and writing to PCI device configuration
pciutils: registers. For example, you can adjust the latency timers with it.
pciutils:
pciutils: pcimodules lists the kernel modules for all plugged in PCI devices.
pciutils:
pciutils: See the manual pages for more details.

PACKAGE NAME:  pcmcia-cs-3.2.8-i486-3.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  225 K
PACKAGE SIZE (uncompressed):  790 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pcmcia-cs: pcmcia-cs (laptop card support)
pcmcia-cs:
pcmcia-cs: Card Services for Linux is a complete PCMCIA support package.  It
pcmcia-cs: includes a set of loadable kernel modules that implement a version of
pcmcia-cs: the PCMCIA Card Services applications program interface, a set of
pcmcia-cs: client drivers for specific cards, and a card manager daemon that can
pcmcia-cs: respond to card insertion and removal events, loading and unloading
pcmcia-cs: drivers on demand.  It supports ``hot swapping'' of PCMCIA cards, so
pcmcia-cs: cards can be inserted and ejected at any time.
pcmcia-cs:
pcmcia-cs:

PACKAGE NAME:  pcmciautils-014-i486-2.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  23 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pcmciautils: pcmciautils (Utilities for using PCMCIA cards with 2.6+ kernels)
pcmciautils:
pcmciautils: This package provides PCMCIA tools that replace the pcmcia-cs tools
pcmciautils: used with the 2.4.x Linux kernel.  PCMCIA cards are commonly used
pcmciautils: in laptops to provide expanded capabilities such as network
pcmciautils: connections, modems, increased memory, and more.
pcmciautils: 
pcmciautils:
pcmciautils: 
pcmciautils:
pcmciautils:

PACKAGE NAME:  pkgtools-tukaani-1.2_rc1-i486-4vl58.tgz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  339 K
PACKAGE SIZE (uncompressed):  1380 K
PACKAGE REQUIRED:  ncurses >= 5.4,gpm >= 1.19,bash >= 3.0,lzma >= 4.32
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pkgtools-tukaani: pkgtools-tukaani (The Slackles & Slackware package maintenance system)
pkgtools-tukaani: 
pkgtools-tukaani: pkgtools-tukanii is a drop in replacement for the original
pkgtools-tukaani: Slack's pkgtools. Mainly, it adds lzma support for various
pkgtools-tukaani: package management utilities (installpkg, removepkg, upgradepkg,
pkgtools-tukaani: makepkg, viewpkg and explodepkg). Also included are 'pkgtool',
pkgtools-tukaani: which is a powerful menu-based program for managing packages,
pkgtools-tukaani: 'slackrepo' for creating package repositories for pkgtool.
pkgtools-tukaani: 
pkgtools-tukaani: Website: http://slackles.slackware.fi/pkgtools/
pkgtools-tukaani: License: GNU GPL
pkgtools-tukaani: Author: Lasse Collin <lasse.collin@slackware.fi>
pkgtools-tukaani: 

PACKAGE NAME:  procps-3.2.7-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  210 K
PACKAGE SIZE (uncompressed):  570 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
procps: procps (utilities for displaying process information)
procps:
procps: The procps package provides the classic set of utilities used to
procps: display information about the processes currently running on the 
procps: machine.
procps:
procps:
procps:
procps:
procps:
procps:

PACKAGE NAME:  reiserfsprogs-3.6.19-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  200 K
PACKAGE SIZE (uncompressed):  1000 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
reiserfsprogs: reiserfsprogs
reiserfsprogs:
reiserfsprogs: These utilities are used for Reiserfs.  Reiserfs is a file system
reiserfsprogs: based on balanced tree algorithms.  Learn more at the home site:
reiserfsprogs: http://www.namesys.com
reiserfsprogs:
reiserfsprogs: Reiserfs is the work of Hans Reiser and many others.  See the file
reiserfsprogs: /usr/doc/reiserfs*/README for full credits.
reiserfsprogs:
reiserfsprogs:
reiserfsprogs:

PACKAGE NAME:  sed-4.1.5-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  133 K
PACKAGE SIZE (uncompressed):  440 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sed: sed (stream editor)
sed:
sed: This is the GNU version of sed, a stream editor.  A stream editor is
sed: used to perform basic text transformations on an input stream (a file
sed: or input from a pipeline).  It is sed's ability to filter text in a
sed: pipeline which distinguishes it from other types of editors.
sed:
sed: sed is a required package (it is needed by many system scripts).
sed:
sed:
sed:

PACKAGE NAME:  shadow-4.0.3-i486-13.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  568 K
PACKAGE SIZE (uncompressed):  1870 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
shadow: shadow (shadow password suite)
shadow:
shadow: This set of login related programs utilizes an alternate, non-readable
shadow: file to contain the actual encrypted passwords.  This is presumed to 
shadow: increase system security by increasing the difficulty with which 
shadow: system crackers obtain encrypted passwords.  It was written by 
shadow: Julianne Frances Haugh and the Linux port is maintained by Tomasz
shadow: Kloczko.
shadow:
shadow: This package provides 'login', which is needed to log into the system.
shadow:

PACKAGE NAME:  sharutils-4.6.3-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  155 K
PACKAGE SIZE (uncompressed):  660 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sharutils: sharutils (GNU shell archive packing utilities)
sharutils:
sharutils: `shar' makes so-called shell archives out of many files, preparing
sharutils: them for transmission by electronic mail services.  `unshar' helps
sharutils: unpacking shell archives after reception.  `uuencode' prepares a file
sharutils: for transmission over an electronic channel which ignores or otherwise
sharutils: mangles the eight bit (high order bit) of bytes.  `uudecode' does the
sharutils: converse transformation.  `remsync' allows for remote synchronization
sharutils: of directory trees using electronic mail. 
sharutils:
sharutils:

PACKAGE NAME:  slapt-get-0.9.11f-i586-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  138 K
PACKAGE SIZE (uncompressed):  780 K
PACKAGE REQUIRED:  curl,libidn,glibc-solibs | glibc,binutils,openssl-solibs | openssl,pkgtools | pkgtools-tukaani,zlib
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  gslapt
PACKAGE DESCRIPTION:
slapt-get: slapt-get (APT like system for Slackware)
slapt-get: slapt-get is an APT like system for Slackware package management.
slapt-get: 
slapt-get:  * See /usr/doc/slapt-get-0.9.11f/ for complete documentation. 
slapt-get:  * You will also want to customize /etc/slapt-get/slapt-getrc,
slapt-get:    using a local mirror.  www.slackware.com may be very busy.
slapt-get:  * Support:
slapt-get:    http://software.jaos.org/cgi-bin/mailman/listinfo/slapt-get-user
slapt-get:  * Please translate
slapt-get:    http://software.jaos.org/BUILD/slapt-get/po/slapt-get.pot
slapt-get:    then send to slapt-get-devel@software.jaos.org
slapt-get: 

PACKAGE NAME:  slocate-3.1-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  26 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
slocate: slocate (Secure Locate)
slocate:
slocate: Slocate is an enhanced version of locate, a command to help you locate
slocate: files on the system.  Like the original version of locate, Slocate
slocate: maintains a database of files on the system, updating it nightly.
slocate: Unlike the original, Slocate indexes every file on the machine rather
slocate: than only the ones that can be seen by everyone.  The "secure" part of
slocate: slocate is that it will only return matches if the user is allowed to
slocate: see the files.
slocate:
slocate:

PACKAGE NAME:  sshfs-fuse-1.7-i586-1vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  32 K
PACKAGE SIZE (uncompressed):  110 K
PACKAGE REQUIRED:  fuse >= 2.6.1,glib2 >= 2.10.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sshfs-fuse: sshfs-fuse (SSH filesystem client)
sshfs-fuse: 
sshfs-fuse: This is a filesystem client based on the SSH File Transfer Protocol. 
sshfs-fuse: Since most SSH servers already support this protocol it is very easy 
sshfs-fuse: to set up: i.e. on the server side there's nothing to do. On the 
sshfs-fuse: client side mounting the filesystem is as easy as logging into the 
sshfs-fuse: server with ssh.
sshfs-fuse: 
sshfs-fuse: Miklos Szeredi <miklos@szeredi.hu>
sshfs-fuse: http://fuse.sourceforge.net/sshfs.html
sshfs-fuse: GNU GENERAL PUBLIC LICENSE, Version 2, June 1991

PACKAGE NAME:  sysklogd-1.4.1-i486-9.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  54 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sysklogd: sysklogd (Linux system logging utilities)
sysklogd:
sysklogd: Dr. Greg Wettstein and Stephen Tweedie's syslogd/klogd.
sysklogd:
sysklogd: This package contains a modified version of syslogd for the Linux
sysklogd: environment.  An additional utility, klogd, is included which allows
sysklogd: kernel logging to be directed through the syslogd facility.
sysklogd: Syslogd and klogd are started when your system boots.
sysklogd:
sysklogd:
sysklogd:

PACKAGE NAME:  syslinux-2.13-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  85 K
PACKAGE SIZE (uncompressed):  330 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
syslinux: syslinux (SYSLINUX/PXELINUX/ISOLINUX boot loaders)
syslinux:
syslinux: SYSLINUX is a boot loader for the Linux operating system which
syslinux: operates off an MS-DOS/Windows FAT filesystem.  This is used by the
syslinux: Slackware makebootdisk script to create system boot floppies.
syslinux:
syslinux: Also included are PXELINUX and ISOLINUX, boot loaders for booting from
syslinux: a network server or CD-ROM.
syslinux:
syslinux: SYSLINUX, PXELINUX, and ISOLINUX were written by H. Peter Anvin.
syslinux:

PACKAGE NAME:  sysvinit-2.84-i486-69.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  251 K
PACKAGE SIZE (uncompressed):  650 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sysvinit: sysvinit (init, the parent of all processes)
sysvinit:
sysvinit: System V style init programs by Miquel van Smoorenburg that control
sysvinit: the booting and shutdown of your system.  These support a number of
sysvinit: system runlevels, each with a specific set of utilities spawned.
sysvinit: For example, the normal system runlevel is 3, which starts agetty
sysvinit: on virtual consoles tty1 - tty6.  Runlevel 4 starts xdm.
sysvinit: Runlevel 0 shuts the system down.
sysvinit:
sysvinit:
sysvinit:

PACKAGE NAME:  tar-1.15.1-i486-2.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  535 K
PACKAGE SIZE (uncompressed):  1490 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tar: tar (archiving utility)
tar:
tar: This is the GNU version of tar, an archiving program designed to store
tar: and extract files from an archive file known as a tarfile.  A tarfile
tar: may be made on a tape drive, however, it is also common to write a
tar: tarfile to a normal file.
tar:
tar: Slackware's package system uses tarfiles compressed with GNU gzip.
tar:
tar:
tar:

PACKAGE NAME:  udev-097-i486-10.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  173 K
PACKAGE SIZE (uncompressed):  790 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
udev: udev (dynamic device directory system)
udev:
udev: udev provides a dynamic device directory containing only the files
udev: for the devices which are actually present.  It creates or removes
udev: device node files usually located in the /dev directory.
udev:
udev: udev requires a 2.6 or newer kernel.
udev:
udev: Kay Sievers is the udev maintainer.
udev:
udev:

PACKAGE NAME:  umsdos-progs-1.13-i386-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
umsdos-progs: umsdos-progs
umsdos-progs: 
umsdos-progs: Various utilities needed for the UMSDOS filesystem.
umsdos-progs: 
umsdos-progs: These programs were originally written by Jacques Gelinas, and are
umsdos-progs: currently maintained by Matija Nalis.
umsdos-progs: 
umsdos-progs: 
umsdos-progs: 
umsdos-progs: 
umsdos-progs: 

PACKAGE NAME:  usbutils-0.72-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  85 K
PACKAGE SIZE (uncompressed):  270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
usbutils: usbutils (USB utilities)
usbutils:
usbutils: lsusb displays detailed information about all USB buses and devices
usbutils: in the system.
usbutils:
usbutils: usbmodules lists the kernel modules for a plugged in USB device.
usbutils:
usbutils: See the manual pages for more details.
usbutils:
usbutils:
usbutils:

PACKAGE NAME:  utempter-1.1.3-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
utempter: utempter (utmp updating library and utility)
utempter:
utempter: The utempter package provides a utility and shared library that
utempter: allows terminal applications such as xterm and screen to update
utempter: /var/run/utmp and /var/log/wtmp without requiring root privileges.
utempter:
utempter:
utempter:
utempter:
utempter:
utempter:

PACKAGE NAME:  util-linux-2.12r-i486-5.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  1120 K
PACKAGE SIZE (uncompressed):  4660 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
util-linux: util-linux (a huge collection of essential utilities)
util-linux:
util-linux: The util-linux package is a huge collection of random utilities that
util-linux: are essential to run a Linux system.  This package includes the
util-linux: util-linux package from ftp.kernel.org, plus some related programs
util-linux: from other sources such as adjtimex, bsdstrings, net-tools (only for
util-linux: 'hostname', a complete version is in the tcpip package), schedutils,
util-linux: setserial, and ziptool.
util-linux:
util-linux:
util-linux:

PACKAGE NAME:  vasm-6.0.1-noarch-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  182 K
PACKAGE SIZE (uncompressed):  870 K
PACKAGE REQUIRED:  pkgtools,nmap >= 3.93,expect >= 5.43,vlsetup >= 5.0,bash >= 3.0,tclx >= 8.3,tcl >= 8.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vasm: vasm2 (Vector Linux Configurators)
vasm: 
vasm: VASM Reloaded.
vasm: 
vasm: Author: Vector Linux
vasm: License: GNU GPL
vasm: 

PACKAGE NAME:  vl-hot-1.0.0-noarch-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  39 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  bash >= 3.0,udev >= 0.94,gambas-runtime_full >= 1.0.15 | gambas >= 1.0.15
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  gksu >= 1.0.7
PACKAGE DESCRIPTION:
vl-hot: vl-hot (udev-based external block device automounting system)
vl-hot: 
vl-hot: vl-hot is a new udev-based external block device automounting system
vl-hot: developed for Vector Linux SOHO 5.1, to replace the previous buggy
vl-hot: hotplug-based usb-mount scripts. VL-Hot should handle all external
vl-hot: block devices that use scsi emulation (USB, Firewire, PCCard, etc). 
vl-hot: Now with GUI vl-hot-config.
vl-hot: 
vl-hot: Joe1962 <joe1962@users.sourceforge.net>
vl-hot: GNU LIBRARY GENERAL PUBLIC LICENSE, Version 2, June 1991
vl-hot: 

PACKAGE NAME:  vl-hot-1.0.0-noarch-5vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  39 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  bash >= 3.0,udev >= 0.94,gambas-runtime >= 1.0.17 | gambas >= 1.0.17
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  gksu >= 1.0.7
PACKAGE DESCRIPTION:
vl-hot: vl-hot (udev-based external block device automounting system)
vl-hot: 
vl-hot: vl-hot is a new udev-based external block device automounting system
vl-hot: developed for Vector Linux SOHO 5.1, to replace the previous buggy
vl-hot: hotplug-based usb-mount scripts. VL-Hot should handle all external
vl-hot: block devices that use scsi emulation (USB, Firewire, PCCard, etc). 
vl-hot: Now with GUI vl-hot-config.
vl-hot: 
vl-hot: Joe1962 <joe1962@users.sourceforge.net>
vl-hot: GNU LIBRARY GENERAL PUBLIC LICENSE, Version 2, June 1991
vl-hot: 

PACKAGE NAME:  vlapt-6.0.0-noarch-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  23 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  pkgtools,checkinstall >= 1.6,vasm2,slapt-get >= 0.9,bash >= 3.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  # VECPKG dependency,Xdialog
PACKAGE DESCRIPTION:
vlapt: vecpkg (Vector Linux package utilities)
vlapt: 
vlapt: Contains pkg (cli) and vecpkg (dialog),
vlapt: the handy utilities to manage packages.
vlapt: Now fully supports slapt-get dependency.
vlapt: Enjoy ...
vlapt: 
vlapt: Author: Robert S. Lange & Eko M. Budi

PACKAGE NAME:  vlconfig2-5.8-i586-1vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  314 K
PACKAGE SIZE (uncompressed):  520 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vlconfig2: configuration files and fixed .desktop files 
vlconfig2: 
vlconfig2: this package should be installed last after all other packages
vlconfig2:

PACKAGE NAME:  vldoc-5.0.0-noarch-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  62 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vldoc: vldocs (Vector Linux documentations)
vldoc: 
vldoc: Vector Linux documentations and initial mail for root.
vldoc: 
vldoc: Author: UK-Bill
vldoc: Author: Kocil
vldoc: 
vldoc: 

PACKAGE NAME:  vlilo-stunning-5.0.0-noarch-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  40 K
PACKAGE REQUIRED:  lilo >= 22.5.9-i486-2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vlilo-stunning: vlilo-stunning (LILO bitmap menu)
vlilo-stunning: 
vlilo-stunning: Original graphics by maf3000.
vlilo-stunning: Remake by Kocil
vlilo-stunning: 

PACKAGE NAME:  vlsetup-5.0-i386-4vl58.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  55 K
PACKAGE SIZE (uncompressed):  180 K
PACKAGE REQUIRED:  bash >= 3.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vlsetup: vlsetup (Vector Linux autodetection)
vlsetup: 
vlsetup: Hardware detection utilities
vlsetup: 

PACKAGE NAME:  xfsprogs-2.8.10_1-i486-1.tlz
PACKAGE LOCATION:  ./base
PACKAGE SIZE (compressed):  621 K
PACKAGE SIZE (uncompressed):  3720 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfsprogs: xfsprogs (tools to use the XFS filesystem)
xfsprogs:
xfsprogs: XFS is a high performance journaling filesystem which originated
xfsprogs: on the SGI IRIX platform.  It is completely multi-threaded, can
xfsprogs: support large files and large filesystems, extended attributes,
xfsprogs: variable block sizes, is extent based, and makes extensive use of
xfsprogs: Btrees (directories, extents, free space) to aid both performance
xfsprogs: and scalability.
xfsprogs:
xfsprogs:
xfsprogs:

PACKAGE NAME:  VL5.8-initscripts-noarch-4vl58.tlz
PACKAGE LOCATION:  ./bootsplash
PACKAGE SIZE (compressed):  78 K
PACKAGE SIZE (uncompressed):  420 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:

PACKAGE NAME:  bootsplash-VL-Tux-noarch-4vl58.tlz
PACKAGE LOCATION:  ./bootsplash
PACKAGE SIZE (compressed):  1856 K
PACKAGE SIZE (uncompressed):  2470 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:

PACKAGE NAME:  bootsplash-VL-Tux-transp-noarch-4vl58.tlz
PACKAGE LOCATION:  ./bootsplash
PACKAGE SIZE (compressed):  1779 K
PACKAGE SIZE (uncompressed):  2410 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:

PACKAGE NAME:  autoconf-2.60-noarch-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  530 K
PACKAGE SIZE (uncompressed):  1830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
autoconf: autoconf (generate configuration scripts)
autoconf:
autoconf: GNU autoconf is an extensible package of m4 macros that produce shell
autoconf: scripts to automatically configure software source code packages.
autoconf: These scripts can adapt the packages to many kinds of UNIX-like
autoconf: systems without manual user intervention.  Autoconf creates a
autoconf: configuration script for a package from a template file that lists the
autoconf: operating system features that the package can use, in the form of m4
autoconf: macro calls.  You must install the "m4" package to be able to use
autoconf: autoconf.
autoconf:

PACKAGE NAME:  automake-1.9.6-noarch-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  402 K
PACKAGE SIZE (uncompressed):  1390 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
automake: automake (a Makefile generator)
automake:
automake: This is Automake, a Makefile generator.  It was inspired by the 4.4BSD
automake: make and include files, but aims to be portable and to conform to the
automake: GNU standards for Makefile variables and targets.  Automake is a Perl
automake: script.  The input files are called Makefile.am.  The output files are
automake: called Makefile.in; they are intended for use with Autoconf.  Automake
automake: requires certain things to be done in your configure.in.  You must
automake: install the "m4" and "perl" packages to be able to use automake.
automake:
automake:

PACKAGE NAME:  bin86-0.16.15-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  56 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bin86: bin86 (8086 assembler/loader)
bin86:
bin86: This is a complete 8086 assembler and loader which can make 32-bit
bin86: code for the 386+ processors.  In the past it was used to compile the
bin86: 16-bit bootsector and setup binaries for the kernel, but modern
bin86: (2.4.x or newer) kernels use GNU ld instead.
bin86:
bin86: The bin86 package is needed to compile 2.2.x or earlier kernels.
bin86:
bin86:
bin86:

PACKAGE NAME:  binutils-2.15.92.0.2-i486-3.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  1891 K
PACKAGE SIZE (uncompressed):  7410 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
binutils: binutils (GNU binary development tools)
binutils:
binutils: Binutils is a collection of binary utilities.  It includes "as" (the 
binutils: portable GNU assembler), "ld" (the GNU linker), and other utilities
binutils: for creating and working with binary programs.
binutils:
binutils: These utilities are REQUIRED to compile C, C++, Objective-C, Fortran,
binutils: and most other programming languages.
binutils:
binutils:
binutils:

PACKAGE NAME:  bison-2.1-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  290 K
PACKAGE SIZE (uncompressed):  980 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bison: bison (parser generator similar to yacc)
bison:
bison: GNU "Bison" is a general-purpose parser generator that converts a
bison: grammar description for an LALR(1) context-free grammar into a C
bison: program to parse that grammar.
bison:
bison: Bison is upward compatible with Yacc:  all properly-written Yacc
bison: grammars ought to work with Bison with no change.  Anyone familiar
bison: with Yacc should be able to use Bison with little trouble.
bison:
bison:

PACKAGE NAME:  byacc-1.9-i386-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  24 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
byacc: byacc (Berkeley Yacc parser generator)
byacc:
byacc: Berkeley Yacc is an LALR(1) parser generator.  Berkeley Yacc
byacc: has been made as compatible as possible with AT&T Yacc.  Berkeley
byacc: Yacc can accept any input specification that conforms to the AT&T
byacc: Yacc documentation.  Specifications that take advantage of
byacc: undocumented features of AT&T Yacc will probably be rejected.
byacc: If you skip this package and install GNU bison, a /usr/bin/yacc
byacc: shell script will be created which will allow you to use bison
byacc: instead. (It contains 'bison -y $*')
byacc:

PACKAGE NAME:  ccache-2.4-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  21 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ccache: ccache (a fast compiler cache)
ccache:
ccache: ccache is a compiler cache. It speeds up re-compilation of C/C++ code
ccache: by caching previous compiles and detecting when the same compile is
ccache: being done again.
ccache:
ccache: ccache was written by Andrew Tridgell.
ccache:
ccache:
ccache:
ccache:

PACKAGE NAME:  cvs-1.11.22-i586-4vl58.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  1857 K
PACKAGE SIZE (uncompressed):  4970 K
PACKAGE REQUIRED:  perl >= 5.8.8,bash >= 3.1.017
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cvs: cvs (Concurrent Versions System)
cvs: 
cvs: CVS is a version control system, which allows you to keep old 
cvs: versions of files (usually source code), keep a log of who, when, and 
cvs: why changes occurred, etc., like RCS or SCCS.  It handles multiple 
cvs: developers, multiple directories, triggers to enable/log/control 
cvs: various operations, and can work over a wide area network.
cvs: 
cvs: http://cvs.nongnu.org/
cvs: GNU GENERAL PUBLIC LICENSE, Version 1, February 1989
cvs: GNU LIBRARY GENERAL PUBLIC LICENSE, Version 2, June 1991
cvs: 

PACKAGE NAME:  doxygen-1.4.7-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  1981 K
PACKAGE SIZE (uncompressed):  6620 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
doxygen: doxygen (documentation generator)
doxygen:
doxygen: Doxygen is a documentation system for C++, C, Java, IDL, and to some
doxygen: extent PHP and C#.  Doxygen generates project documentation using
doxygen: special documentation blocks in the source code, easing the process of
doxygen: keeping docs and code in sync.  Doxygen produces documentation in
doxygen: several output formats, including HTML, LaTeX, man pages, RTF, XML,
doxygen: compressed HTML, PostScript, and PDF.
doxygen:
doxygen:
doxygen:
doxygen:

PACKAGE NAME:  expect-5.43.0-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  314 K
PACKAGE SIZE (uncompressed):  1430 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
expect: expect
expect:
expect: Expect is a program that talks to other interactive programs according
expect: to a script.  Following the script, Expect knows what can be expected
expect: from a program and what the correct response should be.  An
expect: interpreted language provides branching and high-level control
expect: structures to direct the dialogue. 
expect:
expect: Expect was written by Don Libes of the National Institute of Standards
expect: and Technology.
expect:

PACKAGE NAME:  flex-2.5.4a-i486-3.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  155 K
PACKAGE SIZE (uncompressed):  370 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
flex: flex (fast lexical analyzer generator)
flex:
flex: flex is a tool for generating programs that perform pattern matching
flex: on text.  flex is a rewrite of the AT&T Unix lex tool (the two
flex: implementations do not share any code, though), with some extensions
flex: (and incompatibilities).
flex:
flex:
flex:
flex:
flex:

PACKAGE NAME:  g-wrap-1.9.6-i586-4vl58.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  165 K
PACKAGE SIZE (uncompressed):  730 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
g-wrap: G-Wrap is a tool (and Guile library) for generating function wrappers
g-wrap: for inter-language calls. It currently only supports generating Guile wrappers for C functions.

PACKAGE NAME:  gcc-3.4.6-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  3008 K
PACKAGE SIZE (uncompressed):  9170 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gcc: gcc (Base GCC package with C support)
gcc:
gcc: GCC is the GNU Compiler Collection.
gcc:
gcc: This package contains those parts of the compiler collection needed to
gcc: compile C code.  Other packages add C++, Fortran, Objective-C, and
gcc: Java support to the compiler core.
gcc:
gcc:
gcc:
gcc:

PACKAGE NAME:  gcc-g++-3.4.6-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  7216 K
PACKAGE SIZE (uncompressed):  46130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gcc-g++: gcc-g++ (C++ for GCC)
gcc-g++:
gcc-g++: C++ support for the GNU Compiler Collection.
gcc-g++:
gcc-g++: This package contains those parts of the compiler collection needed to
gcc-g++: compile C++ code.  The base gcc package is also required.
gcc-g++:
gcc-g++:
gcc-g++:
gcc-g++:
gcc-g++:

PACKAGE NAME:  gdb-6.5-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  1390 K
PACKAGE SIZE (uncompressed):  3050 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gdb: gdb (the GNU symbolic debugger)
gdb:
gdb: The purpose of a debugger such as GDB is to allow you to see what is
gdb: going on "inside" another program while it executes -- or what another
gdb: program was doing at the moment it crashed.  GDB can help you catch
gdb: bugs in the act.  You can use GDB to debug programs written in C, C++,
gdb: Modula-2, and Fortran 77.
gdb:
gdb:
gdb:
gdb:

PACKAGE NAME:  gettext-tools-0.15-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  1760 K
PACKAGE SIZE (uncompressed):  6540 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gettext-tools: gettext-tools
gettext-tools:
gettext-tools: The GNU gettext-tools package is useful for authors and maintainers of
gettext-tools: internationalized software, or for anyone compiling programs that
gettext-tools: use the gettext functions.  This package provides the needed tools and
gettext-tools: library functions for the handling of messages in different languages.
gettext-tools: Some other GNU packages use the gettext program (included in this
gettext-tools: package) to internationalize the messages given by shell scripts.
gettext-tools:
gettext-tools:
gettext-tools:

PACKAGE NAME:  guile-1.8.0-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  1455 K
PACKAGE SIZE (uncompressed):  5080 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
guile: guile
guile:
guile: This is Guile, Project GNU's extension language library.  Guile is an
guile: interpreter for Scheme, packaged as a library that you can link into
guile: your applications to give them their own scripting language.  Guile
guile: will eventually support other languages as well, giving users of
guile: Guile-based applications a choice of languages.
guile:
guile:
guile:
guile:

PACKAGE NAME:  kernel-headers-2.4.33.3-i386-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  886 K
PACKAGE SIZE (uncompressed):  4760 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
kernel-headers: kernel-headers (Linux kernel include files)
kernel-headers:
kernel-headers: These are the include files from the Linux kernel.
kernel-headers:
kernel-headers: You'll need these to compile most system software for Linux.
kernel-headers:
kernel-headers:
kernel-headers:
kernel-headers:
kernel-headers:
kernel-headers:

PACKAGE NAME:  libtool-1.5.22-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  294 K
PACKAGE SIZE (uncompressed):  2460 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libtool: libtool (a generic library support script)
libtool:
libtool: This is GNU Libtool, a generic library support script. Libtool hides
libtool: the complexity of using shared libraries behind a consistent, portable
libtool: interface.  To use libtool, add the new generic library building
libtool: commands to your Makefile, Makefile.in, or Makefile.am.  See the
libtool: documentation for details.
libtool:
libtool: You must install the "m4" package to be able to use libtool.
libtool:
libtool:

PACKAGE NAME:  m4-1.4.6-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  104 K
PACKAGE SIZE (uncompressed):  240 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
m4: m4 (an implementation of the UNIX macro processor)
m4:
m4: This is GNU m4, a program which copies its input to the output,
m4: expanding macros as it goes.  m4 has built-in functions for including
m4: named files, running commands, doing integer arithmetic, manipulating
m4: text in various ways, recursion, etc...  Macros can also be user-
m4: defined, and can take any number of arguments.
m4:
m4: GNU 'm4' was originally written by Rene Seindal, from Denmark.
m4:
m4:

PACKAGE NAME:  make-3.81-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  362 K
PACKAGE SIZE (uncompressed):  1190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
make: make (GNU make utility to maintain groups of programs)
make:
make: This is the GNU implementation of make, which was written by Richard
make: Stallman and Roland McGrath.  The purpose of the make utility is to
make: determine automatically which pieces of a large program need to be 
make: recompiled, and issue the commands to recompile them.  
make:
make: This is needed to compile just about any major C program, including
make: the Linux kernel.
make:
make:

PACKAGE NAME:  motor-3.4.0-i586-4vl58.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  386 K
PACKAGE SIZE (uncompressed):  1150 K
PACKAGE REQUIRED:  ncurses >= 5.4,cxxlibs >= 5.0,gcc-g++ >= 3.3,gpm >= 1.19,bash >= 3.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
motor: Motor (TUI IDE for GCC development tools)
motor: 
motor: Motor is a text mode based programming environment for Linux. It
motor: consists of a powerful editor with syntax highlight feature, project
motor: manager, makefile generator, gcc and gdb front-end, etc. Deep CVS
motor: integration is also provided. A symbol browser is provided to make it
motor: easier to move between various definitions in the source.
motor: 
motor: Author  : Konstantin Klyagin <konst@konst.org.ua>
motor: License : GNU GPL
motor: Author's homepage : http://konst.org.ua/
motor: Product homepage  : http://konst.org.ua/motor/
motor: 

PACKAGE NAME:  nasm-0.98.39-i586-4vl58.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  278 K
PACKAGE SIZE (uncompressed):  1360 K
PACKAGE REQUIRED:  perl >= 5.8.8
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
nasm: nasm (NASM assembler)
nasm: 
nasm: NASM is the Netwide Assembler, a free portable assembler for the 
nasm: Intel 80x86 microprocessor series, using primarily the traditional 
nasm: Intel instruction mnemonics and syntax.
nasm: 
nasm: NASM was written by Simon Tatham and Julian Hall.
nasm: http://sf.net/projects/nasm/
nasm: GNU LESSER GENERAL PUBLIC LICENSE, Version 2.1, February 1999
nasm: 

PACKAGE NAME:  perl-5.8.8-i486-3.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  9689 K
PACKAGE SIZE (uncompressed):  33320 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
perl: perl (Practical Extraction and Report Language)
perl:
perl: Larry Wall's "Practical Extraction and Report Language".  Perl is a
perl: language optimized for scanning arbitrary text files, extracting
perl: information from those text files, and printing reports based on that
perl: information.  It's also a good language for many system management
perl: tasks.  The language is intended to be practical (easy to use,
perl: efficient, complete) rather than beautiful (tiny, elegant, minimal).
perl:
perl:
perl:

PACKAGE NAME:  pkgconfig-0.21-i486-3.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  50 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pkgconfig: pkgconfig
pkgconfig:
pkgconfig: pkg-config is a system for managing library compile/link flags
pkgconfig: that works with automake and autoconf.  It replaces the ubiquitous
pkgconfig: *-config scripts you may have seen with a single tool.  See the man
pkgconfig: page that comes with pkg-config for full documentation.
pkgconfig:
pkgconfig:
pkgconfig:
pkgconfig:
pkgconfig:

PACKAGE NAME:  pmake-2.1.35-i386-2.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  135 K
PACKAGE SIZE (uncompressed):  410 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pmake: pmake (BSD parallel make)
pmake:
pmake: This is PMake -- a parallel Make program originally written for the
pmake: Sprite operating system, ported from BSD Unix.  This may be useful if
pmake: you're going to port software with Makefiles designed for BSD.
pmake:
pmake: PMake was written by Adam de Boor and Andreas Stolcke.
pmake:
pmake:
pmake:
pmake:

PACKAGE NAME:  pygtk-2.8.6-i586-4vl58.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  730 K
PACKAGE SIZE (uncompressed):  4530 K
PACKAGE REQUIRED:  python >= 2.4.3,bash >= 3.1.017,libglade >= 2.5.1,gtk+2 >= 2.8.20,libxml2 >= 2.6.26,zlib >= 1.2.3,atk >= 1.10.3,pango >= 1.12.3,cairo >= 1.0.4,glib2 >= 2.10.3,x11 >= 6.9.0,fontconfig >= 2.2.3,freetype >= 2.1.9,libpng >= 1.2.12,expat >= 1.95.8
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pygtk: pygtk (gtk Python wrappers)
pygtk: 
pygtk: PyGTK provides a convenient wrapper for the GTK library for use in 
pygtk: Python programs, and takes care of many of the boring details such as 
pygtk: managing memory and type casting.
pygtk: 
pygtk: Original author: James Henstridge <james@daa.com.au>
pygtk: Current maintainer: Johan Dahlin <johan@gnome.org>
pygtk: www.pygtk.org
pygtk: GNU LESSER GENERAL PUBLIC LICENSE, Version 2.1, February 1999
pygtk: 

PACKAGE NAME:  python-2.4.3-i486-4.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  7242 K
PACKAGE SIZE (uncompressed):  52490 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
python: python (object-oriented interpreted programming language)
python:
python: Python is an interpreted, interactive, object-oriented programming
python: language that combines remarkable power with very clear syntax.  
python: Python's basic power can be extended with your own modules written in
python: C or C++.  Python is also adaptable as an extension language for
python: existing applications. 
python:
python:
python:
python:

PACKAGE NAME:  ruby-1.8.4-i486-2.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  1689 K
PACKAGE SIZE (uncompressed):  11460 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ruby: ruby (Interpreted object-oriented scripting language)
ruby:
ruby: Ruby is an interpreted scripting language for quick and easy
ruby: object-oriented programming.  It has many features to process text
ruby: files and to do system management tasks (as in Perl).  It is simple,
ruby: straight-forward, and extensible.
ruby:
ruby: Visit the Ruby project online at http://www.ruby-lang.org/
ruby:
ruby:
ruby:

PACKAGE NAME:  strace-4.5.14-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  77 K
PACKAGE SIZE (uncompressed):  230 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
strace: strace (trace system calls and signals)
strace:
strace: Strace allows you to trace the execution of a command.  It runs the
strace: specified command until it exits, intercepting signals and system
strace: calls and dumping the information to the standard error.  System
strace: administrators, diagnosticians and trouble-shooters will find it
strace: invaluable for solving problems with programs for which the source
strace: is not readily available since they do not need to be recompiled in
strace: order to trace them.  
strace:
strace:

PACKAGE NAME:  tcl-8.4.13-i486-2.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  1430 K
PACKAGE SIZE (uncompressed):  5130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tcl: tcl (Tool Command Language)
tcl:
tcl: Tcl, developed by Dr. John Ousterhout, is a simple to use text-based
tcl: script language with many built-in features which make it especially
tcl: nice for writing interactive scripts.
tcl:
tcl:
tcl:
tcl:
tcl:
tcl:

PACKAGE NAME:  tclx-8.3.5-i486-2.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  480 K
PACKAGE SIZE (uncompressed):  2200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tclx: tclx (Extended Tcl)
tclx:
tclx: Extended Tcl (TclX), is a set of extensions to Tcl, the Tool Command
tclx: Language invented by Dr. John Ousterhout. Extended Tcl is oriented
tclx: towards Unix system programming tasks and large application
tclx: development. Many additional interfaces to the Unix operating system
tclx: are provided. Extended Tcl was designed and implemented by Karl
tclx: Lehenbauer (karl@NeoSoft.com) and Mark Diekhans (markd@Grizzly.com),
tclx: with help in the early stages from Peter da Silva (peter@NeoSoft.com).
tclx:
tclx:

PACKAGE NAME:  tk-8.4.13-i486-1.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  1478 K
PACKAGE SIZE (uncompressed):  4350 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tk: tk (Tk toolkit for Tcl)
tk:
tk: Tk is an extension to Tcl that allows you to quickly and easily build
tk: X11 applications that have the look and feel of Motif apps.
tk:
tk:
tk:
tk:
tk:
tk:
tk:

PACKAGE NAME:  vim-7.0-i586-4vl58.tlz
PACKAGE LOCATION:  ./dev
PACKAGE SIZE (compressed):  3888 K
PACKAGE SIZE (uncompressed):  17690 K
PACKAGE REQUIRED:  gtk+2 >= 2.8.20,atk >= 1.10.3,pango >= 1.12.4,cairo >= 1.0.4,glib2 >= 2.10.3,x11 >= 6.9.0,ncurses >= 5.5,libiconv >= 1.11,acl >= 2.2.39_1,gpm >= 1.20.1,fontconfig >= 2.2.3,freetype >= 2.1.9,zlib >= 1.2.3,libpng >= 1.2.12,attr >= 2.4.32_1,expat >= 1.95.8,bash >= 3.1.017,perl >= 5.8.8,tcsh
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vim70: Vim is an advanced text editor that seeks to provide the power of the de-facto Unix editor 'Vi'

PACKAGE NAME:  bcm43xx_firmware-0.1-noarch-4vl58.tlz
PACKAGE LOCATION:  ./drivers
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bcm43xx_firmware: bcm43xx_firmware (Broadcom 43xx firmware for Linux)
bcm43xx_firmware:
bcm43xx_firmware: This packge will enable you to use the native
bcm43xx_firmware: bcm43xx module thats ships with Kernel 2.6.17,
bcm43xx_firmware: for wireless networking with the Broadcom
bcm43xx_firmware: 43xx series chips.
bcm43xx_firmware:
bcm43xx_firmware: Website: ?
bcm43xx_firmware: License: ?

PACKAGE NAME:  madwifi-0.9.2.1-2.6.18.5-i586-2vl58.tlz
PACKAGE LOCATION:  ./drivers
PACKAGE SIZE (compressed):  457 K
PACKAGE SIZE (uncompressed):  1970 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
madwifi: a Linux kernel device driver for Wireless LAN chipsets from Atheros

PACKAGE NAME:  ndiswrapper-1.29_2.6.17.13-i586-1vl58.tlz
PACKAGE LOCATION:  ./drivers
PACKAGE SIZE (compressed):  1312 K
PACKAGE SIZE (uncompressed):  5790 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ndiswrapper: Some wireless LAN vendors refuse to release hardware specifications or
ndiswrapper: drivers for their products for operating systems other than Microsoft
ndiswrapper: Windows. The ndiswrapper project makes it possible to use such
ndiswrapper: hardware with Linux by means of a loadable kernel module that "wraps
ndiswrapper: around" NDIS (Windows network driver API) drivers. This rpm contains
ndiswrapper: just the userspace tools. You will also need the kernel module rpm.
ndiswrapper: 
ndiswrapper: Kernel module for ndiswrapper.
ndiswrapper: 
ndiswrapper: 
ndiswrapper: License: GNU GPL v2
ndiswrapper: Authors: Pontus Fuchs
ndiswrapper: Giridhar Pemmasani
ndiswrapper: 
ndiswrapper: -------------------------------------
ndiswrapper: BUILDDATE >  Nov 23, 2006
ndiswrapper: HOST      >  Linux 2.6.17.13 i586
ndiswrapper: DISTRO    >  Vector Linux RC3 11-18-2006             
ndiswrapper: CFLAGS    > -O2 -march=i586 -mcpu=i586
ndiswrapper: Packager  > Uelsk8s
ndiswrapper: Config    >

PACKAGE NAME:  qemu-0.8.2-i586-4vl58.tlz
PACKAGE LOCATION:  ./emulators
PACKAGE SIZE (compressed):  1444 K
PACKAGE SIZE (uncompressed):  10130 K
PACKAGE REQUIRED:  zlib >= 1.2.3,alsa-lib >= 1.0.11,SDL >= 1.2.9,cxxlibs >= 6.0.3,x11 >= 6.9.0,gcc >= 3.4.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
qemu: 
qemu: 
qemu: QEMU is a FAST! processor emulator using dynamic translation to 
qemu: achieve good emulation speed. QEMU has two operating modes: Full 
qemu: system emulation and User mode emulation (Linux host only). An 
qemu: optional proprietary QEMU Accelerator Module is available to optimize 
qemu: the case where a PC is emulated on a PC.
qemu: 
qemu: GNU LESSER GENERAL PUBLIC LICENSE, GNU GENERAL PUBLIC LICENSE.
qemu: 

PACKAGE NAME:  armagetronad-0.2.8.2.1-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  1358 K
PACKAGE SIZE (uncompressed):  3480 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
armagetronad: Armagetron Advanced
armagetronad: 
armagetronad: Armagetron Advanced is an enhanced version of Manuel Moos' Armagetron
armagetronad: , but with added features like a HUD (Heads Up Display) and better
armagetronad: spam protection.
armagetronad:
armagetronad: 
armagetronad:
armagetronad:
armagetronad:
armagetronad:

PACKAGE NAME:  barrelpatrol-0.9-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  821 K
PACKAGE SIZE (uncompressed):  2030 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
barrelpatrol: Barrel Patrol
barrelpatrol: 
barrelpatrol: Protect your oil barrels from marauding enemy tanks
barrelpatrol:
barrelpatrol: 
barrelpatrol:
barrelpatrol:
barrelpatrol:
barrelpatrol:
barrelpatrol:
barrelpatrol:

PACKAGE NAME:  bloboats-1.0.1-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  6879 K
PACKAGE SIZE (uncompressed):  8340 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bloboats: bloboats (A platform game)
bloboats: 
bloboats: Bloboats is a boat racing game in the spirit of Elasto Mania or
bloboats: X-Moto, introducing a handful of elements from Super Mario Bros
bloboats: -like games.
bloboats:      http://bloboats.dy.fi/
bloboats:
bloboats: 
bloboats:
bloboats:
bloboats:

PACKAGE NAME:  ceferino-0.9.75-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  1982 K
PACKAGE SIZE (uncompressed):  2330 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ceferino: Don Ceferion Hazana
ceferino: 
ceferino: A game similar to 'Super Pang'. You are attacked by little green
ceferino: balls which are bouncing around and which you have to kill with your
ceferino: knife.
ceferino:
ceferino: 
ceferino:
ceferino:
ceferino:
ceferino:

PACKAGE NAME:  chromium-0.9.12-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  1143 K
PACKAGE SIZE (uncompressed):  1850 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
chromium: Chromium B.S.U.
chromium: 
chromium: Chromium B.S.U. is a fast paced, vertically scrolling shooter.
chromium:
chromium: 
chromium:
chromium:
chromium:
chromium:
chromium:
chromium:

PACKAGE NAME:  enemylines3-1.2-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  458 K
PACKAGE SIZE (uncompressed):  830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
enemylines3: Enemylines 3
enemylines3: 
enemylines3: Semi-abstract single-player, first person 3d-shooter game. Shoot evil
enemylines3: robots before they get too close or use your jetpack to escape. The
enemylines3: robos can't jump but they tear down walls.
enemylines3:
enemylines3: 
enemylines3:
enemylines3:
enemylines3:
enemylines3:

PACKAGE NAME:  enemylines6-1.1-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  209 K
PACKAGE SIZE (uncompressed):  350 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
enemylines6: Enemylines 6
enemylines6: 
enemylines6: 3d navigation with reduced visual information. You are a damaged
enemylines6: alien spy probe. With visual systems malfunctioning all you have
enemylines6: left for navigation is some particle detector. You have to reach
enemylines6: your pickup zone before system failure.
enemylines6:
enemylines6: 
enemylines6:
enemylines6:
enemylines6:

PACKAGE NAME:  frozen-bubble-2.1.0-i586-1vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  18997 K
PACKAGE SIZE (uncompressed):  30780 K
PACKAGE REQUIRED:  SDL >= 1.2.11-i586-4vl58,SDL_Pango >= 0.1.2-i586-1vl58,SDL_Perl >= 2.1.3-i586-6vl58,SDL_mixer >= 1.2.7-i586-4vl58,expat >= 1.95.8-i486-1,fontconfig >= 2.2.3-i486-2,freetype >= 2.1.9-i486-1,glib2 >= 2.10.3-i486-1,glibc-solibs >= 2.3.6-i486-6,libiconv >= 1.11-i586-4vl58,pango >= 1.12.4-i486-1,perl >= 5.8.8-i486-3,perl-gettext >= 1.0.5-noarch-1vl58,svgalib >= 1.4.3-i386-2,x11 >= 6.9.0-i486-11,zlib >= 1.2.3-i486-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
frozen-bubble: A Puzzle Bubble clone written in perl (now with network support)
frozen-bubble:
frozen-bubble: Colorful 3D rendered penguin animations, 100 levels of 1p game,
frozen-bubble: hours and hours of 2p game, nights and nights of 2p/3p/4p/5p
frozen-bubble: game over LAN or Internet, a level-editor, 3 professional
frozen-bubble: quality digital soundtracks, 15 stereo sound effects, 8 unique
frozen-bubble: graphical transition effects, 8 unique logo eye-candies.
frozen-bubble:
frozen-bubble: More than ever, you really need this game.
frozen-bubble:
frozen-bubble:

PACKAGE NAME:  gl-117-1.3.2-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  1422 K
PACKAGE SIZE (uncompressed):  6200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gl-117: GL-117
gl-117: 
gl-117: GL-117 is an OpenGL- and SDL-based action flight simulator written in
gl-117: C++. It provides a random terrain generator, lighting effects, sounds,
gl-117: and joystick support.
gl-117:
gl-117: 
gl-117:
gl-117:
gl-117:
gl-117:

PACKAGE NAME:  glaxium-0.5-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  1455 K
PACKAGE SIZE (uncompressed):  2300 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glaxium: Glaxium
glaxium: 
glaxium: Glaxium is an OpenGL-based space-ship "shoot-em-up" styled game. It
glaxium: is designed to provide the same feel as the old 2D games of that
glaxium: type, but with 3D for the special effects.
glaxium:
glaxium: 
glaxium:
glaxium:
glaxium:
glaxium:

PACKAGE NAME:  goom-2k4.0-i586-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  86 K
PACKAGE SIZE (uncompressed):  270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
goom: goom (xmms audio visualization plugin)
goom: 
goom: This is my first visual plugins for XMMS,
goom: and I think that it's the best I have ever done !
goom: 
goom: Website: http://www.ios-software.com/
goom: License: GNU GPL
goom: Author: Jean-Christophe Hoelt <jeko@ios-software.com>

PACKAGE NAME:  kiki-0.9-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  2828 K
PACKAGE SIZE (uncompressed):  5280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
kiki: Kiki the nano bot
kiki: 
kiki: "kiki the nano bot" is a 3-D puzzle game, basically a mixture of the
kiki: games Sokoban and Kula-World.
kiki:
kiki: 
kiki:
kiki:
kiki:
kiki:
kiki:

PACKAGE NAME:  megamario-1.3-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  1856 K
PACKAGE SIZE (uncompressed):  3850 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
megamario: Mega Mario (A Mario Clone)
megamario: 
megamario: In the game you play Mario and your task is to free his brother
megamario: Luigi, who was captured by the evil Bowser.
megamario:      http://mmario.sourceforge.net/
megamario:
megamario: 
megamario:
megamario:
megamario:
megamario:

PACKAGE NAME:  neverball-1.4.0-i486-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  11667 K
PACKAGE SIZE (uncompressed):  19980 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
neverball: Neverball
neverball:
neverball: The package contains the games Neverball and Neverput.
neverball:
neverball: 
neverball:
neverball:
neverball:
neverball:
neverball:
neverball:

PACKAGE NAME:  ppracer-0.3.1-i586-4vl58.tlz
PACKAGE LOCATION:  ./games
PACKAGE SIZE (compressed):  6112 K
PACKAGE SIZE (uncompressed):  7690 K
PACKAGE REQUIRED:  x11 >= 6.8,SDL >= 1.2,SDL_mixer >= 1.2,Mesa >= 6.4,tcl >= 8.4,libpng >= 1.2,zlib >= 1.2,cxxlibs >= 5.0,gcc-g++ >= 3.3,libvorbis >= 1.1,libogg >= 1.1,libmikmod >= 3.1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ppracer: ppracer (3D arcade games)
ppracer: 
ppracer: A fun penguins racer.
ppracer: PlanetPenguin Racer is based on Tux Racer 0.6.1
ppracer: Tux Racer is a Sunspire Studios Production
ppracer: http://www.sunspirestudios.com
ppracer: 
ppracer: Website: www.planetpenguin.de
ppracer: License: GNU GPL
ppracer: Author: Volker Stroebel <volker@planetpenguin.de>
ppracer